Windows 7 Forums Search
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows 7. The Windows 7 forum also covers news and updates and has an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7 - Default gateway is not available

 
11-01-2009   #1


Windows 7 Starter
 
 

Default gateway is not available

I am using an Acer Aspire One netbook running Windows 7 Starter--for now; I plan to uprade--and an Atheros AR5B93 wireless card. Unfortunately, I am frequently unable to to access the internet. When Windows executes an automated repair, it reports that the "default gateway is not available." It resets the network card, but that only fixes the problem for a very short time, sometimes only a matter of seconds. How can I remedy this problem on a more permanent basis? Thanks in advance.

My System SpecsSystem Spec
11-01-2009   #2


7600.20510 x86
 
 


Quote   Quote: Originally Posted by Cazio View Post
How can I remedy this problem on a more permanent basis?
Set a static ip for the network adapter.
My System SpecsSystem Spec
11-01-2009   #3


Windows 7 Starter
 
 


Unfortunately, that does not help. I am still unable to stay connected. The only difference is that Windows now reports that the problem is that DHCP is not enabled.
My System SpecsSystem Spec
.


11-01-2009   #4


7600.20510 x86
 
 


What settings did you use?
My System SpecsSystem Spec
11-01-2009   #5


Windows 7 Starter
 
 


The ones listed for the wireless adapter under ipconfig /all.
My System SpecsSystem Spec
11-01-2009   #6


7600.20510 x86
 
 


That's problem.

ip address = same as router ip config page shown in the manual. (typically 192.168.0.1 or 192.168.1.1) Change last part only for ip address.

subnet mask = 255.255.255.0

default gateway = same as router ip config page in the manual

preferred dns server = same as router ip config in the manual

Here is a theoretical example:

ip address = 192.168.0.75
subnet mask = 255.255.255.0
default gateway = 192.168.0.1
Preferred dns server = 192.168.0.1
My System SpecsSystem Spec
11-01-2009   #7
aem


Windows 7 Ultimate 64Bit
 
 


I would try and let your system auto detect your LAN setting first. It usually does a good job and you needn't do anything.

But if you need to go static ip, let see your what you have from ipconfig /all?
My System SpecsSystem Spec
11-01-2009   #8


Windows 7 Starter
 
 


Well, there is an issue there. The network I'm connecting to is a campus wireless network, not a personal one.
My System SpecsSystem Spec
11-01-2009   #9
aem


Windows 7 Ultimate 64Bit
 
 


Quote   Quote: Originally Posted by Cazio View Post
Well, there is an issue there. The network I'm connecting to is a campus wireless network, not a personal one.
Have you tried having it set to autodetect?

What is your ipconfig /all?

If you are wanting just to plug in your default gateway, then that depends on your network, usually and theoretically it's the first node (IP) in your immediate network.
My System SpecsSystem Spec
Reply

 Default gateway is not available problems?



Thread Tools



Similar Threads for: Default gateway is not available
Thread Forum
The default gateway is not available. Please Help Network & Sharing
Solved The default gateway is not available Network & Sharing
what is default gateway? 192.168.1.1 Network & Sharing
My default gateway is 0.0.0.0 how do i change my default gateway Network & Sharing
The Default Gateway is Not available Network & Sharing


All times are GMT -5. The time now is 04:45 PM.



Windows 7 Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30