Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Marvell Yukon 88E8059 - Can't register resources

29 Sep 2014   #1
IoNGeNeRaL

Windows 10 Pro x64 (UPGRADED - 10/20/2016)
 
 
Marvell Yukon 88E8059 - Can't register resources

Hey guys.

I have a big problem with my LAN controller..for some reason the driver for it has randomly stopped working. I've tried to reinstall the setup from Marvell's website a number of times, rebooted etc but it just won't bring it back. It's an onboard Ethernet controller on an ASUS Crosshair IV Formula AM3 motherboard.

Event Viewer shows that it just failed randomly but doesn't say what the cause was.
Quote:
Failed to register PCI resources

The description for Event ID 5000 from source yukonw7 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event:

\Device\NDMP26
Marvell Yukon 88E8059 Family PCI-E Gigabit Ethernet Controller

the message resource is present but the message is not found in the string/message table
This is all I see in the Event Viewer.

EDIT#1: I also see the following:
Quote:
The Peer Networking Grouping service depends on the Peer Name Resolution Protocol service which failed to start because of the following error:
%%-2140995069
Help with this ASAP would be highly appreciated.

Thank you.


My System SpecsSystem Spec
.
29 Sep 2014   #2
maxie

windows 7 home 64bit
 
 

Hi ... The Link below might be of some Help ...


[RESOLVED]Errors in Event Viewer - Windows Forums
My System SpecsSystem Spec
29 Sep 2014   #3
IoNGeNeRaL

Windows 10 Pro x64 (UPGRADED - 10/20/2016)
 
 

Screenshots below of Services.


Attached Thumbnails
Marvell Yukon 88E8059 - Can't register resources-screenshot_1.png   Marvell Yukon 88E8059 - Can't register resources-screenshot_2.png   Marvell Yukon 88E8059 - Can't register resources-screenshot_3.png  
My System SpecsSystem Spec
.

29 Sep 2014   #4
maxie

windows 7 home 64bit
 
 

Run a System Scan to see if there is any corrupt Files ..


SFC /SCANNOW Command - System File Checker
My System SpecsSystem Spec
29 Sep 2014   #5
IoNGeNeRaL

Windows 10 Pro x64 (UPGRADED - 10/20/2016)
 
 

My system already performed one automatically after a display driver crash. It caused a BSOD with a STOP code of 0x0EA or something.
My System SpecsSystem Spec
29 Sep 2014   #6
maxie

windows 7 home 64bit
 
 

My System SpecsSystem Spec
29 Sep 2014   #7
IoNGeNeRaL

Windows 10 Pro x64 (UPGRADED - 10/20/2016)
 
 

I deleted the idstore file but service still won't start.. :|
My System SpecsSystem Spec
29 Sep 2014   #8
maxie

windows 7 home 64bit
 
 

Back to the Drawing board again ...
My System SpecsSystem Spec
29 Sep 2014   #9
IoNGeNeRaL

Windows 10 Pro x64 (UPGRADED - 10/20/2016)
 
 

I don't know what to do. Reinstalling Windows is an absolute no-no.
My System SpecsSystem Spec
29 Sep 2014   #10
maxie

windows 7 home 64bit
 
 

Try philj55 Post in the Link below ...

Can't start Peer Name Resolution Protocol
My System SpecsSystem Spec
Reply

 Marvell Yukon 88E8059 - Can't register resources




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Yukon 88E8059 Ethernet Drivers
Hey guys, I kind of have a wee bit of a problem. I have 2 versions of Windows OS on my computer, Windows 7 Ultimate x64 on my primary Hard Disk, and Windows Vista Ultimate x86 on a secondary Hard Disk (2 different drives). Windows 7 is my primary OS, and Vista is my new backup secondary OS (in case...
Drivers
Marvell Yukon Driver
Hi, Just wondering who else has a Marvell Yukon network controller and are you happy with the new driver changes? Thanks,
Drivers
Windows 7 & Marvell Yukon 88E8001
I am having a strange problem with the onboard Marvell Yukon 88E8001 network adapter running on Windows 7 64bit. For some reason it has suddenly stopped being able to connect to the routers DCHP and obtain an IP address, nothing has changed and it was working fine previous. When I type...
Network & Sharing
Marvell Yukon 88E8056 PCI
Hi Folks, I have a eathernet card as in the title, and it refuses to function with Windows 7 or Ubuntu 10.10, However the thing logs on to the internet just fine with an older Ubuntu 9.0 that I ran from a disk, and of course, it ran fine with the previous XP. I got the newest driver and installed...
Hardware & Devices
Marvell Yukon Gigabit Ethernet freezeing every 15 mins
Earlier many reported this problem with win 7 x64 build 7100, now I did a clean install of build 7600 x64 & the problem is now more frequently happening every 15 mins it freezes the comp. Uploading stops downloading sometime stops sound/video freezes applications stop responding nothing can...
Network & Sharing
Marvell Yukon Controller cant connect
Hi, I just loaded Windows 7 Build 7600 and cant connect to network or internet through my on-board Marvell Yukon gigabit controller. I've updated my drivers to the latest i can find (v. 11.22.4.3) and still nothing. Occasionally it will show I'm connected, but when I launch IE it drops connection....
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:55.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App