PC can not detect Ethernet cable


  1. Posts : 1
    Windows Ultimate x64
       #1

    PC can not detect Ethernet cable


    Yesterday I was playing Orion: Prelude with my friend. We were just about to play space engineers but I had to go and have Dinner. When I came back my internet was working, and then it broke. It had a red X on the Network Icon, normally this just means the the ethernet cable is playing up and when I troubleshoot it fixes it. This time I wasn't so lucky. It failed to fix the problem and it also said "Local Area Connection" does not have a valid IP address, after attempting troubleshoot a few more times it stopped recognising I was connected to a network altogether. It has not been able to recognise the network since yesterday. My Ethernet cable worked with a different PC. The Routers ports are working. And I cleaned the ports in my wall and my PC. The only thing is my PC is not connected directly to the router. It is connected to a port in the wall and then through the port to the router, as does the other PC's using Ethernet besides the one in the office that connects directly which is the one I tested the Ethernet cable with. This problem appeared out of nowhere. I have the latest drivers so if there is anything you can do to help, it would be greatly appreciated. The only thing I can do is carry my PC to the office and test it there.

    Sorry for the long description but I didn't want to leave anything out,
      My Computer


  2. Posts : 2,298
    Windows 7 Professional x64 SP1 ; Windows Server 2012 R2 Standard
       #2

    To better assist you can you please follow this tutorial - Basic Requirements Before Posting your Networking Thread. This can help us identify what may be causing your issue.

    As of currently I am assuming a hardware based fault rather than anything software related though I will await the IPconfig results from the tutorial above.

    Many Thanks,
    Josh :)
      My Computer


  3. Posts : 1,074
    Windows 7 Profession 64-bit
       #3

    Have you done a full shutdown and boot? That is, exit Windows, shutdown the computer and unplug the computer from the wall (or, if your PSU has one, set the master power switch on the back of the PSU to off)? This is the only way to totally remove all power from your motherboard as the ATX Form Factor standard requires PC PSU's to provide +5Vsb standby voltage to several points on the motherboard to keep settings "alive" - this includes the NIC.

    So a full shutdown of the computer will force your computer to reset it's network connection.

    Also note that Ethernet cables are cheap, very low-tech, not very robust, but critical network devices that cannot withstand too many yanks or trip-overs. I would replace the cables.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 09:43.
Find Us