Wireless n connection with new router help/info needed

thevetran

thanks for the info i think they helped but one question
I could not find the setting on my router but everything was changed to your settings


Go to
Wireless > VLAN & QoS
Enable U-APSD and enable WMM

I changed everything else and show better than 54mbps.
screen shot

Now when i do a internet speed test its slower than the settings i had set.

regular pc wired to router 17mbps down
6.04 up

laptop now7.5mbps down
6.5mbps up

laptop before your settings
10.5mbps down
5.6mbps up.

Should not my speed be almost the same as my pc or at least the settings i had before i changed to yours.

Again want to thank you for your help Im getting closer but i think my down and up speed should be close to what my wired speed is.

thanks hope you might have some further help with the settings.

Wireless speed per windows is showing that you're running wireless-n which solved your question " cant seem to get the type n connection working."

The speed is now saying 243 Mbps which is clearly N-spec but the speed test is showing 7.5 Mbps. I would suggest to have another wireless device, preferably with n capability and test if you get all the speed. If the other device gets full speed, router isn't the fault and your Intel 6250 might be defective or that the newer drivers aren't any good.

Thanks again for the reply. I might uninstall the drivers and then reinstall the driver and see if that works.
Unfortunately i do not have anything else that is type n for test to see if the speed is faster.
I might buy another adapter card also and replace but im sure there is nothing wrong with the intel centrino advanced 6205 card.

Thanks for all the help much appreciated