Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Wake on Lan WOL - static public IP

22 Jan 2015   #1
kubajz

Mac OS X; Win XP,7
 
 
Wake on Lan WOL - static public IP

Hi,
please help, I have one older computer with static public IP from provider. Everything is set, from BIOS, from OS. From command prompt I found out that everything I need is running and that I'm not behind any router to check out ARP settings. My IP is static and public but after few seconds, it's not more than one minute, I am not able to wake that PC up. This is main issue in my point of view. On many threads all across the web I found many users which WOL forking only 5-10 minutes after shut down. Mine is working one minute maximum. And second on this is that I'm not able to set ARP because I'm not behind any router. In this case, isn't WOL supposed to work with BIOS and OS settings? Or is ARP an issue for static public IP too?
Thanks, I'm here online and already done a lot of research on that. If I can post something for better suport maybe I've already done that so please.
PS: Maybe BIOS upgrade? There is some WOL settings but not very clear.


My System SpecsSystem Spec
.
22 Jan 2015   #2
PeaB4YouGo

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Well, before we get to the point where we might offer help, finish getting us some system specs on teh machine you're working with.

System Specs
My System SpecsSystem Spec
22 Jan 2015   #3
kubajz

Mac OS X; Win XP,7
 
 

CPU: Intel Celeron D 356 (Cedar Mill-V, C1)
3333 MHz (25.00x133.3) @ 3345 MHz (25.00x133.8)
Motherboard: ASUS P5GPL
Chipset: Intel 915PL (Grantsdale-PL) + ICH6
Memory: 1536 MBytes @ 200 MHz, 3.0-4-4-8
- 1024 MB PC3200 DDR-SDRAM - Kingston K
- 512 MB PC3200 DDR-SDRAM - Nanya Technology M1U51264DS8HC3G-5T
Graphics: GIGABYTE GV-NX62TC
NVIDIA GeForce 6200 TurboCache, 128 MB DDR2 SDRAM
Drive: ST3160815A, 156.3 GB, E-IDE (ATA-7)
Drive: ST3160815AS, 156.3 GB, Serial ATA 1.5Gb/s
Drive: HL-DT-ST DVD-RAM GSA-H22N, DVD+R DL
Sound: Intel 82801FB ICH6 - High Definition Audio [C0]
Network: Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Adapter
My System SpecsSystem Spec
.

Reply

 Wake on Lan WOL - static public IP




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Laptop extremely slow to wake up from sleep mode, 5+ minutes to wake
Hi, I am new here. Hoping someone can help me out with this issue. I work in IT so am not a complete computer bonehead and am at my wits end with this. My laptop is about 4 years old, it's a toshiba. For whatever reason, it started taking 5+ minutes to wake up from sleeping. If it sleeps...
Performance & Maintenance
Static IP Changes To Public Network
WIN7 SP1, Comcast Cable (internet only), Motorola gateway, Ethernet Cable, Onboard Realtek LAN, IPv6 disabled. My IP address of 192.xxx keeps changing to 169.254.52.105 and to public network. I tried manually setting IP in v4 properties but that doesn't work nor does modem refresh or ipconfig...
Network & Sharing
Cannot turn off "Public Folder Sharing" for public network
I have two network cards in my PC. One of them connects to the internet while the other connects to my home network. The issue is enabling public folders for the home network in "Network and Sharing Center" enables public folders for the public network also. In other words Windows grants...
Network & Sharing
Difference Between Wake up on LAN and On Board Wake up on LAN ???
I have ASUS G72. Logmein software is able to wake the computer up with On Board Wake up is disabled or enabled in BIOS. I have also Toshiba L505D. Logmein software can wake the computer up only if Wake up on LAN is enabled in BIOS. What is the difference between ASUS BIOS's On Board Wake up...
General Discussion
Remote wake MCE from xbox / Wake on Lan
When I was using MCE 2005, I used to be able to wake my MCE via xbox360. After I upgraded to Windows 7, I seem to have lost this functionality. My initial suspect was that Wake on Lan is not working. When I check my driver setting on Windows 7 machine, it is checked so I would assume it is set...
Media Center
Sound Static Help (removes most static)
Stumbled upon this trying to fix my static and it helped it out a bit, not 100% though but thought i would share it. Anyways; goto your playback devices > click your speaker properties > advanced > and change the default format to a higher setting, such as 24 bit, 48000hz (studio quality) ...
Sound & Audio


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:59.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App