Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: How to configure wifi router 2L-WR307

27 Jan 2015   #1
howto

Windows 7 Ultimate x64
 
 
How to configure wifi router 2L-WR307

I was searching for configuration help online but couldn't find it please help me

Link to router specification:
Wireless N Router 2LooK 2L-WR307 300Mb/s beži




Attached Images
How to configure wifi router 2L-WR307-2l-wr307-wifi-router-v03-608x667.jpg 
My System SpecsSystem Spec
.
27 Jan 2015   #2
PeaB4YouGo

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Knowing how you plan to use your network will determine what kind of config you need. Please elaborate a bit.
My System SpecsSystem Spec
28 Jan 2015   #3
howto

Windows 7 Ultimate x64
 
 

I want to replace my old TP-LINK
How to configure wifi router 2L-WR307-tplnkkkkkk.jpg
...with new 2look
How to configure wifi router 2L-WR307-newr.jpg
I plan to use ADSL wireless connection
I guess I understood your question so forgive me if I'm wrong Thank you for your time!


My System SpecsSystem Spec
.

28 Jan 2015   #4
PeaB4YouGo

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

From the looks of things, here's what you'll need to do:

1. After connecting your router into the ADSL modem, as you did with the TP-LINK, find CAT6 cable and connect your computer directly to one of the four ethernet ports.

2. Start a browser and go to http://192.168.0.1 (When prompted for username and password, use Admin/admin, per the sticker on your new router.)

3. Find your administrator settings and change that password to something new.

4. Find your wireless settings and set your security to WPA2/WPA Personal and set a passphrase that you'll need to remember.

5. Find the settings for DHCP and enable that. Also, check your DNS settings. I usually set mine to the servers at OpenDNS (208.67.220.220 and 208.67.222.222)

6. Log out of the setup page then reboot the router. Disconnect your computer from the router (pull the CAT6 cable).

Once the router reboots, attempt to connect your system to the network using wireless (you will need that passphrase from step 4).

Good luck. Let us know if there is anything else that needs to be configured...
My System SpecsSystem Spec
29 Jan 2015   #5
howto

Windows 7 Ultimate x64
 
 

Thank you very much for your instructions on how to configure this router.
I did it but the Internet speed was 150 now it is 54 just like on TP-LINK.
Radio type is 802.11g and it should I guess be 802.11n like it says on the router surface.
I think that the range stayed like it was before.
Now I have two wireless connections.
My System SpecsSystem Spec
04 Feb 2015   #6
woodman21

Win 7 32 bit
 
 

Remove your wireless connections and create a new one, set the new router to 802.11N. Also if you have any other wireless routers they will need to be 802.11N otherwise the speed is going to drop down to the slower speed. (i.e. 802.11G)
My System SpecsSystem Spec
Reply

 How to configure wifi router 2L-WR307




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
How to configure wifi modem having router with DSL modem ?
Hello, I have a BSNL wireless modem having inbuilt router.The modem has some DSL problem and cannot use the ethernet port to connect to my desktop.So I bought a new Baton DSL modem without wifi facility. I now need the WIFI connectivity to connect with my phone for browsing net. For that...
Network & Sharing
Multi Router Network - Configure
How to Set Up a Network Using 2 (or more) Routers Before attempting this tutorial, please be familiar with the following terms: DCHP, LAN, NAT, Switch, Gateway.
Tutorials
How to configure tomato on linksys router?
i finally hae my comp back up and running.i need to know if there is a way to configure tomato on my router so it gets the best performance. is there a tut somewhere or a pdf? i hear it is really good but i hae no knowledge of using it, could someone p[oint me in the right direction please?
Network & Sharing
how do I configure this router for VPN
Hi, I am trying to setup remote access for our work pc's using VPN, for 4 different work pc's/users. I am getting close but can't quite get it to work. Attached is an image of my router's VPN configuration page. I know I need to use port 1723, but I can't seem to use the same port number for all of...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:54.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App