Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Wake On Lan (over the internet)

05 Mar 2015   #1
Bellzemos

Windows 7 Ultimate x64 SP1
 
 
Wake On Lan (over the internet)

Hi!

I am able to Wake On Lan a remote PC - but only on the same LAN.

I would like to be able to do it over the internet or at lease to a different subnet for starters.

How would I go about it? I've opened port 9 in the router of the subnet for the remote computer's IP but it doesn't work. I've tried a couple Magic Packet sender programs but it won't work with any.

Please help.


My System SpecsSystem Spec
.
06 Mar 2015   #2
Bellzemos

Windows 7 Ultimate x64 SP1
 
 

Anyone, please?
My System SpecsSystem Spec
08 Mar 2015   #3
Bellzemos

Windows 7 Ultimate x64 SP1
 
 

Hi again!

I'll try to explain my WOL over WAN situation more in depth. I'm using NirSoft's WakeMeOnLan to send the magic packet.

The computer (PC A) I'm on is on a 192.168.1.X network and the one I would like to wake up (PC B) is on the 192.168.2.X subnet. I have a UTP cable going from 192.168.1.X LAN port into the 192.168.2.1 router's WAN port. And PC B is connected into the 192.168.2.1 router. While PC A is connected into the 192.168.1.1 router. Router's IP in the 192.168.1.X network is 192.168.1.100. IP of PC A is 192.168.1.101. PC B's IP on the 192.168.2.X subnet is 192.168.2.2.

In the router's Virtual servers page I have entered this: Inbound port = 9, type = both (TCP / UDP), Private port = 9, Private IP address = 192.168.2.2. But it doesn't work, it won't wake up the PC B through the WAN port.

If I connect PC B to the 192.168.1.X network, meaning the same subnet as PC A then I am able to wake it up without a problem. But when I connect it on the 192.168.2.X network I am unable to do it.

Note: I am able to connect remotely to the PC B on the other subnet using the 3389 port so router's port forwarding works. I really don't know what's the problem about WOL. I also have the MAC addresses of both the PC B and the router (it's LAN and it's WAN MAC) but don't really know how to use them in the WOL program.

It could be that I'm not doing things right in the WakeMeOnLan program, could you please tell me what to do in it to make WOL over WAN work?

Thank you a ton!
My System SpecsSystem Spec
.

08 Mar 2015   #4
Bellzemos

Windows 7 Ultimate x64 SP1
 
 

Anyone, pretty please?
My System SpecsSystem Spec
10 Mar 2015   #5
AK6DN

Windows 7 Professional x64 SP1
 
 

Refer to: Wake-on-LAN - Wikipedia, the free encyclopedia

Requires more than port forwarding across a router, your router must be configured for broadcast forwarding. Your router may or may not support this function. Refer to the section on 'Subnet Directed Broadcasts' for specifics.
My System SpecsSystem Spec
Reply

 Wake On Lan (over the internet)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Wake On WAN Via Internet From Anywhere Problem
Hi all, the past 2 weeks, I spent more than 24 hours searching for methods to wake on WAN but the tutorials were so confusing regarding the port forwarding. I have already done wake on lan over local network or local wifi but I couldn't do that from outside my company. Can someone describe how...
Network & Sharing
Wake on LAN over the internet
Hi All, I know this been sent couple of times before . but i just want to clearify something about this WOL over the internet . I have a NetGear-DGND4000. am not sure how good this is to do the above task. but from looking around the internet I had a look on some toutorials. and this...
Network & Sharing
Is it possible to wake on LAN remotely through internet
Before posting my question i feel that i must say this. SevenForums has become my exclusive source when looking for answers no matter how simple or complicated the questions may be... This is the only site that the answers are up to the point, simple, effective and to my experience always spot-on...
Network & Sharing
No Internet Connection After Boot UP or Wake Up
I don't have an internet connection after boot up or after I wake the system up from sleep. This happens just about everytime, the troubleshooter have no problem fixing it every time. There is nothing wrong with the network as I still get a dial tone on the telephone.
Network & Sharing
Wake on lan a computer over the internet.
hey guys. i would like to know if its possible to wake up my desktop computer from another computer not in the same network. is this possible? i found some guides in the internet instructing to put an ip address and mac address. but it won't work. note: i am working with static ip. and i...
Network & Sharing
laptop sleep mode: internet lost upon wake-up
I am using Acer Travelmate 8204WLMi laptop running the latest RC build of Windows 7. The internet connection is lost on both LAN adapter and WLAN (3945ABG) adapter when laptop is restored from a 'sleep' mode. I have disabled 'Power Management' of each adapter via the Device Manager. I have updated...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App