Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: acess to computer by two remote possibilities

27 Mar 2015   #1
xbit

Windows Ultimate 64bit
 
 
acess to computer by two remote possibilities

Hello!

I have a server which actually hangs on an cabled Internet connection with a router between and I have a Huawei GSM modem. I do not have always physical access to it and it is used solely over RDP connection.

I have the problem, that sometimes the internet signal over the wired connection ceases to work, i.e. no site is reachable because the provider do not deliver the signal properly, but the system does not recognize it and I would like to remotely change the whole internet traffic to the GSM modem updating the IP over some dynamic IP service.

I was thinking about the following scenario:
- Having the two connections active, but primarily using faster and cheaper wired connection for RDP traffic.
- When the signal is lost, I remotely access the system by GSM modem and dynamic IP service and route all the RDP traffic over this connection
- When the wired signal is back (or after some time) I switch back to it, remotely.

Now my questions:
- How do I get the computer to hold two connections at the same time?
- Is it possible to access the computer by RDP via cable or GSM modem at the same time?
- Am I thinking to complicated and there is a easier way out?

I really searched a lot, but did not find a topic equal to my needs. If you have some ideas or links for further reading I would be very happy to hear them.

Please bear in mind, I am situated almost in the Brazilian jungle, so access to some fancy hardware is more than complicated for me.

Thanks for any ideas!


My System SpecsSystem Spec
.
28 Mar 2015   #2
xbit

Windows Ultimate 64bit
 
 

Somebody? Please?
My System SpecsSystem Spec
Reply

 acess to computer by two remote possibilities




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Win7 to Win10 Possibilities?
Anyone exploring the possibilities of moving from Win7 to Win10 upon release. Anyone with experience with Win10 can share insights for Win7 users - probably done before, but haven't seen much lately (mainly just Win8 to Win10). Thanks gumboman
General Discussion
Identifying remote computer for Remote Desktop Connection
Remote Desktop Connection wants the IP or name of the remote computer to connect to. But suppose the remote computer is behind a router. The router has one WAN IP, say 192.45.63.98, which will be the same for all the computers connected off of that router, (when you google "my ip" from any of...
Network & Sharing
I have no network acess/limited acess
Hi. I have a problem where my computer (as stated in the title) has no network acess/limited acess, even though I have all 5 bars of strength full. It also has a little yellow triangle with a *!* in it. If I reset the router, I'm connected for about 5 minutes, but then it goes back to the little...
Network & Sharing
Old Desktop Upgrade possibilities
Hello Guys! I do have an old desktop back home in Romania that my family is using it so i can keep in touch with them,and i want to upgrade it a bit because when i am going home and using it...seems a bit slow and...it is quite old! I do need some advice with the possibilites of upgrade! I have...
Hardware & Devices
Remote Desktop Client 6.1 Cannot connect to remote computer
We have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect. I receive an immediate failure with the...
Network & Sharing
Acess Denied on Wife's Computer
I am about to give up, I cannot get my wife's computer to let me access her files Via the network (I want to be able to access all her files not just a few.) I have 3 other machines on the network, no problems accessing the files on them, There are 4 computers on the network, all are running...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:41.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App