No Internet access for wireless devices

I've configure my router that connects to my desktop modem. my LAN has internet access by not using "obtain IP adddress automatically " but the Wireless device has no internet access. if I use the automatic settings. both local and wireless has no internet connection.

please help me solve this problem. thanks in advanced!

here's my internet protocol settings

IP ADD : 192.168.1.8
SUB MASK: 255.255.255.0
DEFAULT GATEWAY: 192.168.1.1

PREFERED DNS: 192.168.1.1

It is possible the DHCP server on your router is stopped if you don't get an IP address when it is set to automatic.

I would check that first.

GokAy said:

It is possible the DHCP server on your router is stopped if you don't get an IP address when it is set to automatic.

I would check that first.

Okay sir thankyou! I will wait for your response. thanks in advanced!

Note: You have 2 threads open so I am a bit confused.

Wait me for what? :) You have to do it.

Go into router management screen (http://192.168.1.1), check if DHCP is working.

What IP do you get when you set wireless to automatic?

Run cmd then:
ping 192.168.1.1
after:
ping 173.194.113.72

post results here

GokAy said:

Note: You have 2 threads open so I am a bit confused.

Wait me for what? :) You have to do it.

Go into router management screen (http://192.168.1.1), check if DHCP is working.

What IP do you get when you set wireless to automatic?

Run cmd then:
ping 192.168.1.1
after:
ping 173.194.113.72

post results here

let's focus on this thread sir Gokay okay I will try what you've said.

Same as other thread:

In "DHCP Server Settings" remove:
domain.name

and see if it helps

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\_r3v>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=1ms TTL=30
Reply from 192.168.1.1: bytes=32 time=1ms TTL=30
Reply from 192.168.1.1: bytes=32 time=1ms TTL=30
Reply from 192.168.1.1: bytes=32 time=1ms TTL=30

Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1ms

C:\Users\_r3v>ping 173.194.113.72

Pinging 173.194.113.72 with 32 bytes of data:
Reply from 173.194.113.72: bytes=32 time=423ms TTL=47
Reply from 173.194.113.72: bytes=32 time=443ms TTL=47
Reply from 173.194.113.72: bytes=32 time=438ms TTL=47
Reply from 173.194.113.72: bytes=32 time=418ms TTL=47

Ping statistics for 173.194.113.72:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 418ms, Maximum = 443ms, Average = 430ms

here's the ping. yes DHCP is enabled sir gokay

You are connected to the Internet, but perhaps name resolution (DNS) is not working properly, due to domain.name being entered in that configuration.

So, remove it (DHCP Server Settings) - then run in cmd:
ipconfig -release
ipconfig -renew
ipconfig -flushdns

GokAy said:

You are connected to the Internet, but perhaps name resolution (DNS) is not working properly, due to domain.name being entered in that configuration.

So, remove it (DHCP Server Settings) - then run in cmd:
ipconfig -release
ipconfig -renew
ipconfig -flushdns

it gives me error

C:\Windows\system32>ipconfig -release

Windows IP Configuration

An error occurred while releasing interface Loopback Pseudo-Interface 1 : The sy
stem cannot find the file specified.

The operation failed as no adapter is in the state permissible for
this operation.

C:\Windows\system32>

The domain.name is deleted, right? If so...

Just restart the computer

Better than trying to find interface name etc..