Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple Windows Server 2008 R2

03 Sep 2015   #21
shahidcmc

SERVER 2008 R2
 
 

If i am not wrong this whole arrangement would lead to environment where the clients of both network 172 n 10 will communicate each other..!!!

In server B forward lookup zone you have created A record for single client...!!! what does that mean? will this single client be resolved... if yes, then to make other clients of network 10 resolve their names should i manually add it one by one...?


My System SpecsSystem Spec
.
04 Sep 2015   #22
GokAy

Windows 7 Ultimate x64 SP1
 
 

Yes, I could ping client 10.10.10.50 from ServerA for example. Communications both ways is possible.

You should already have a DNS zone for your domain (needed for Active Directory) so no need to manually enter any records (they should be dynamically updated since clients are authenticated and trusted). Well, open your DNS forward zone and check if you have records for your clients, if not perhaps dynamic update is not configured yet. We can look at that later. First thing first, make your clients on 10.0.0.0/255.0.0.0 accessible.
My System SpecsSystem Spec
04 Sep 2015   #23
shahidcmc

SERVER 2008 R2
 
 

Yes its working great job,,, thanks a lot for your continued assistance

Do you have any idea how to configure UAG " Unified Access Gateway "
I want to install it on server B in this Scenario being the client of Server A having IP assigned by DHCP of Server A.

SO that i can define and apply all the policies of UAG server (in this case it is server B) on the clients of Server A .... is it possible!!!
My System SpecsSystem Spec
.

04 Sep 2015   #24
GokAy

Windows 7 Ultimate x64 SP1
 
 

Before anything else, you should really fix this dynamic IP on ServerB, change it to a static IP and exclude it from DHCP on ServerA You should also consider consolidating DHCP to one server instead of two. For example ServerB can serve both subnets (and even more with DHCP relaying, not needed on your case). You don't need 2 DHCP servers in your network.

Multiple Windows Server 2008 R2-07-dhcp-server-role.jpg

Multiple Windows Server 2008 R2-08-dhcp-subnets.jpg

---------------------------

Coming to UAG, let me tell you it is new for me, however, reading a bit on it:

Quote:
Microsoft Forefront Unified Access Gateway (UAG), is a computer software solution
that provides secure remote access to corporate networks for remote employees
and business partners.
Do you really need this? Clients of ServerA are not considered remote; these are the computers in your company aren't they? What exactly are you trying to accomplish? Please list them as much as possible.


My System SpecsSystem Spec
06 Sep 2015   #25
shahidcmc

SERVER 2008 R2
 
 

You are Right... server A clients are part of Local Lan ....

what i want is:
  • to introduce another server Like Server B with UAG services running on within Server A network of 172.
  • And to allow the clients of Server B to reach internet or access my public Network of 121 behind the private network of Server A (172.20.0.0) Using UAG services.
My System SpecsSystem Spec
07 Sep 2015   #26
shahidcmc

SERVER 2008 R2
 
 

I just left the UAG for a moment and moved to TMG......

I configured every thing.
I can access the web from TMG server but cant access from the clients
I even cant ping the tmg server from clients...
My System SpecsSystem Spec
07 Sep 2015   #27
GokAy

Windows 7 Ultimate x64 SP1
 
 

I will have to check this later, I did install and configure ISA Server back in the days. They should be similar. However, when you install such a service, you should first configure everything to allow and work your way back.
My System SpecsSystem Spec
09 Sep 2015   #28
GokAy

Windows 7 Ultimate x64 SP1
 
 

Ok, I got my virtual network upgraded to Active Directory and installed TMG on Server A.

Here are couple of things you should configure on TMG management console:
- Networking:
---- Networks: Make sure 10.0.0.0 and 172.20.0.0 networks are Internal
---- Routing: Static Route to 10.0.0.0 (Create "Network Topology Route", Destination: 10.0.0.0, Netmask: 255.0.0.0, Gateway: 172.20.0.254, metric: 256 (default))
- Firewall Policy:
---- DNS: New Access Rule - dns - Allow - Add - Infrastructure - DNS - next - Networks (Internal) - Networks (External) - All Users - Finish
---- Ping: New Access Rule - ping - Allow - Add - Infrastructure - Ping - next - Networks (Internal) - Networks (Internal and External) - All Users - Finish
- Web Access Policy
---- HTTPS Inspection (I disabled this one because I didn't have time to get it to work)

Multiple Windows Server 2008 R2-tmg-firewall-policy-02.jpg

Multiple Windows Server 2008 R2-tmg-web-access-policy-03.jpg

Multiple Windows Server 2008 R2-tmg-client-access-04.jpg

Since only HTTP and HTTPS is allowed, FTP for example doesn't allow Internet access. Add FTP to firewall policy similar to dns and ping and it will be allowed once you Apply.


My System SpecsSystem Spec
10 Sep 2015   #29
shahidcmc

SERVER 2008 R2
 
 

Without applying your configuration I did succeed to browse the internet from the 10.0.0.0 network....
I did these things....

1. Assigned a Public static IP to the external interface that is 121.52.X.X
2. 10.10.10.10 to the internal interface
3. Enabled proxy server settings in the web browser and assigned 10.10.10.10 as a proxy server IP.

With these settings i can browse the internet from 10.0.0.0 network clients

* Remember I have not defined the DNS protocol as mentioned by You ....

MY IPv4 statics as follows
  • for 10.0.0.0 Networks
client side : IP 10.10.10.20
DNS 10.10.10.10
No gateway
  • On TMG server
External Lan : IP 121.52.X.X
No DNS
Gateway 121.52.X.Y
Internal Lan : IP 10.10.10.10
Dns 10.10.10.10
No gateway



My System SpecsSystem Spec
11 Sep 2015   #30
GokAy

Windows 7 Ultimate x64 SP1
 
 

Hmm, you seem to have messed up everything or something

On TMG server (ServerA? it doesn't mean much to install TMG on ServerB unless you wan't 10.0.0.0 network to be treated differently but that is another topic) Internal LAN is 10.10.10.10? Typo perhaps? It should have been 172.20.0.1 (in my example), where did that subnet go?

Can you make another drawing of the network please? Include IP addresses, services and as much info as possible.
My System SpecsSystem Spec
Reply

 Multiple Windows Server 2008 R2




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
setting up a server for school help (windows server 2008)
As my final project for the year i am setting up a server that we will eventually move all our computers on to. I am using a poweredge 2900 as a server with windows server 2008 installed. As of now i have 2 computers connected to the domain which they can log on to. - what i need help with -...
Network & Sharing
Help choose: Windows Home Server 2011 vs. Windows Server 2008 R2
I have a file server at home with a Quad core, 4gb ram, and a 3tb of storage. It is running Ubuntu Desktop and sharing video files primarily. From my school I have access to a free copy of Windows Server 2008 R2. Other than the server I have 2 Windows 7 desktops, 1 Windows 7 laptop and 1 Windows...
Software
Windows 2008 Server or Linux for server
Hi all Have been a LONG LONG user of Linux as a server (hosting VM's XP / W7 mix) and file / print sharing. I used to avoid MS like the plague as far as SERVER environments are concerned - probably because my first experince was Windows NT (Windows NeanderThal or Windows No Thanks) which was...
Network & Sharing
Windows Server 2008 help please
so i know this is a windows seven forums, but i wasnt sure where else to post so please excuse me I purchased windows server 2008 a while ago and have misplaced the CD, luckily i have backed it up by copying it :) (backup freak haha) now my problem is i need to reinstall it but cannot boot...
Installation & Setup
Windows home server vs Server 2008 R2
I'm trying to decide between Windows Home Server and Windows Server 2008 R2 for my home server PC. Ordinarily it would be a clear cut choice, but I've got a free copy of Server 2008 R2 through my academic MSDN subscription. I'd like to avoid spending extra money if Server 2008 R2 would do the job....
Software
windows server 2008 rc
i want to know difference between win server 2008 and win7 that oly i want to know
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:18.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App