New
#11
ok here it is :)
Ok try these commands one at a time. Run in cmd:
ping 192.168.1.7
ping 192.168.1.1
ping 8.8.8.8
And report back the results please. A successful ping will show like:
Code:C:\Users\Gokhan>ping 8.8.8.8 Pinging 8.8.8.8 with 32 bytes of data: Reply from 8.8.8.8: bytes=32 time=68ms TTL=43 Reply from 8.8.8.8: bytes=32 time=68ms TTL=43 Reply from 8.8.8.8: bytes=32 time=66ms TTL=43 Reply from 8.8.8.8: bytes=32 time=81ms TTL=43 Ping statistics for 8.8.8.8: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 66ms, Maximum = 81ms, Average = 70ms
By the way, in your ipconfig result, DNS servers are 192.168.1.1 and 0.0.0.0 (the 0.0.0.0 may be causing the problem). That will be next step if you can ping 8.8.8.8.
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ping 192.168.1.7
Pinging 192.168.1.7 with 32 bytes of data:
Reply from 192.168.1.7: bytes=32 time<1ms TTL=128
Reply from 192.168.1.7: bytes=32 time<1ms TTL=128
Reply from 192.168.1.7: bytes=32 time<1ms TTL=128
Reply from 192.168.1.7: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.1.7:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Windows\system32>
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.7: Destination host unreachable.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
C:\Windows\system32>
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ping 8.8.8.8
Pinging 8.8.8.8 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 8.8.8.8:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Windows\system32>
Which firewall are you using?
How is the network location set (Home/Work/Public)? Look in Network and Sharing Center
Can you connect with wire and check in router interface if there are any access lists configured? Also try WPA instead of WPA2 security in router wireless security section.
I Am using Avast Free Antivirus
It would not allow WPA, gave a message saying it was not suitable or something like that.
Can you connect with wire and check in router interface if there are any access lists configured?
I don't understand ????
i have now connected a cable, and viewing my router interface
i have no idea what an access list is.
To be honest, I don't know if it is your laptop or the router.
Try:
- Safe Mode with Networking
- Run as Admin - Download Complete Internet Repair - MajorGeeks
--- Select Options 1/2/3/4 and Reset Windows Firewall