Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Unable to get my Samsung R60Plus Laptop to connect Wirelessly To The I

20 Sep 2015   #1
Delboy793

Windows 7 Pro 64 bit
 
 
Unable to get my Samsung R60Plus Laptop to connect Wirelessly To The I

Hi,

I have obtained a Samsung R60plus Laptop running Windows Vista Home Premium which used to connect wirelessly to the internet with no problems at all using an old Netgear router.
That router gave up the ghost so I have since updated it to a brand new Huawei HG533 Router. All my other PC's and tablets connect wirelessly to this new router no problems at all but i am unable to get this Samsung laptop to connect to the internet at all. It can find the network no problem, I type in my security key very carefully to make sure it is correct yet it will not connect to the Internet.

I have tried disabling the Firewall and antivirus to see if that was causing the problem, yet still no Joy. Even tried Flushing the DNS and updating the firmware on the Router, Still nothing.

I know there is nothing wrong with the Laptop yet I have tried just about everything and have searched the internet high and low for a solution, does anyone have any suggestions ?


My System SpecsSystem Spec
.
20 Sep 2015   #2
GokAy

Windows 7 Ultimate x64 SP1
 
 

Network and Sharing Center - Manage wireless networks - delete the connection and re-connect (can also right click properties - security and see if settings are correct before deleting)
My System SpecsSystem Spec
20 Sep 2015   #3
Delboy793

Windows 7 Pro 64 bit
 
 

Thank you for replying
Tried your suggestions and still unable to connect to the internet wirelessly
My System SpecsSystem Spec
.

20 Sep 2015   #4
GokAy

Windows 7 Ultimate x64 SP1
 
 

Can you connect wirelessly at other places? Do you have a smartphone that you can set as a personal hotspot to test?
My System SpecsSystem Spec
20 Sep 2015   #5
Delboy793

Windows 7 Pro 64 bit
 
 

Due to being disabled and wheelchair bound i am unable to test it anywhere else, But i do know the laptop is working 100 %, it just will not go through the gateway of the router to the internet wirelessly.
No problem at all if i use an Ethernet cable.

Yet all other laptops, Tablets have all connected wirelessly to the internet via this router no problem.
My System SpecsSystem Spec
20 Sep 2015   #6
GokAy

Windows 7 Ultimate x64 SP1
 
 

Does it say connected but can't get access?

Run in cmd and paste here (CTRL+V):
Code:
ipconfig -all |clip
It won't show anything, just paste.
My System SpecsSystem Spec
20 Sep 2015   #7
Delboy793

Windows 7 Pro 64 bit
 
 

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig -all I clip

Error: unrecognized or incomplete command line.

USAGE:
ipconfig [/allcompartments] [/? | /all |
/renew [adapter] | /release [adapter] |
/renew6 [adapter] | /release6 [adapter] |
/flushdns | /displaydns | /registerdns |
/showclassid adapter |
/setclassid adapter [classid] ]

where
adapter Connection name
(wildcard characters * and ? allowed, see examples)

Options:
/? Display this help message
/all Display full configuration information.
/allcompartments Display information for all compartments.
/release Release the IPv4 address for the specified adapter.
/release6 Release the IPv6 address for the specified adapter.
/renew Renew the IPv4 address for the specified adapter.
/renew6 Renew the IPv6 address for the specified adapter.
/flushdns Purges the DNS Resolver cache.
/registerdns Refreshes all DHCP leases and re-registers DNS names
/displaydns Display the contents of the DNS Resolver Cache.
/showclassid Displays all the dhcp class IDs allowed for adapter.
/setclassid Modifies the dhcp class id.

The default is to display only the IP address, subnet mask and
default gateway for each adapter bound to TCP/IP.

For Release and Renew, if no adapter name is specified, then the IP address
leases for all adapters bound to TCP/IP will be released or renewed.

For Setclassid, if no ClassId is specified, then the ClassId is removed.

Examples:
> ipconfig ... Show information
> ipconfig /all ... Show detailed information
> ipconfig /renew ... renew all adapters
> ipconfig /renew EL* ... renew any connection that has its
name starting with EL
> ipconfig /release *Con* ... release all matching connections,
eg. "Local Area Connection 1" or
"Local Area Connection 2"
> ipconfig /allcompartments ... Show information about all
compartments
> ipconfig /allcompartments /all ... Show detailed information about all
compartments

C:\Windows\system32>
My System SpecsSystem Spec
20 Sep 2015   #8
GokAy

Windows 7 Ultimate x64 SP1
 
 

It is not an I in the command but a special char, best is to copy paste. But another approach - do this instead. Run cmd:
Code:
ipconfig -all>>"%userprofile%\desktop\ipconfig.txt"
Attach the txt file from your desktop here
My System SpecsSystem Spec
20 Sep 2015   #9
Delboy793

Windows 7 Pro 64 bit
 
 

i have typed out exactly what you put and it shows nothing except what i have typed ??
is that correct or have i goofed again
My System SpecsSystem Spec
20 Sep 2015   #10
GokAy

Windows 7 Ultimate x64 SP1
 
 

Code:
ipconfig -all>>"%userprofile%\desktop\ipconfig.txt"
It will create a txt file on desktop named ipconfig.txt. Attach that one, using icon, right above.
My System SpecsSystem Spec
Reply

 Unable to get my Samsung R60Plus Laptop to connect Wirelessly To The I




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
how do i connect my windows 7 laptop wirelessly to my server
i have a windows 7 laptop and all of my computers at home are connected to my dell server which is running windows server 2008 r2 threw wires that go to my router, now i want to add my labtop to my server connecting the labtop wireless to my wireless router and from there adding it to my server....
Network & Sharing
Desktop computer can't connect to internet but laptop can wirelessly
Hi all, I apologize on making my first post here asking for help but I have nowhere else to to turn so hopefully someone can help me out with this. In my house I have a wired network as well as a wireless and on the wired network I have my desktop as well as a second (which connects fine to the...
Network & Sharing
Connect a laptop wirelessly to a wired LAN with no router
What are my options for connecting a laptop wirelessly to a workstation that is connected to a wired LAN and has no router? Essentially, I want to add wireless connectivity to the workstation so that the laptop can connect to the wired LAN via the workstation.
Network & Sharing
Unable To Connect My Laptop To My Network
Hi everyone, I bought a new laptop and I am unable to connect to my wireless network. Here's some information that might be useful to find out what the problem is: My computer: Windows XP version 2002 My brand new laptop: Windows 7 Premium Familial Edition My router: Linksys...
Network & Sharing
Cant connect wirelessly
Hi I have a laptop with an Intel Wifi link 5100 AGN Network adapter. As soon as i turn it on through a special key combination, it lists all the networks available. So i try to connect to my secured network, but i get an error saying that it wasnt able to connect. Trying different wireless...
Network & Sharing
[URGENT] Connect 3 laptop wirelessly to play LAN games
This is pretty much a noob question but I needed the answer fairly quickly. I'm looking to connect 3 laptop wirelessly, one using Win7, one vista, one XP (I think they should all be compatible). I'm looking to play some games with the other 2 people and since WE WILL BE IN THE SAME ROOM, so no...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App