Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Mapped drives wont load on startup

20 Nov 2015   #11
bigbwb

Windows 7
 
 

So the above codes would be just run once in a command prompt? Exactly how you listed them (but substituting in my drive letter etc)?


My System SpecsSystem Spec
.
20 Nov 2015   #12
IvanS

Windows 7 Professional 32bit
 
 

To make batch file create new txt document. Write code you need inside that document and then go to file save as. When saving use quota marks like "test.bat" and confirm to save. Now you have batch file.

To make that file run on Windows boot do necessary steps
To run a batch file at start up: start >> all programs >> right-click startup >> open >> right click batch file >> create shortcut >> drag shortcut to startup folder.

And yes, change drive letter and path according to your needs
My System SpecsSystem Spec
20 Nov 2015   #13
torchwood

W7 home premium 32bit/W7HP 64bit/w10 tp insider ring
 
 
services

Is XBMC loading at start-up (immediate) or Delayed/manual.
you can check via
Controlpanel>admin tools>Services>XBMC

Roy
My System SpecsSystem Spec
.

20 Nov 2015   #14
bigbwb

Windows 7
 
 

Quote   Quote: Originally Posted by torchwood View Post
Is XBMC loading at start-up (immediate) or Delayed/manual.
you can check via
Controlpanel>admin tools>Services>XBMC

Roy
Nothing regarding xbmc or Kodi is mentioned under that list? I have a XBMC/Kodi shortcut placed in my startup folder.
My System SpecsSystem Spec
20 Nov 2015   #15
bigbwb

Windows 7
 
 

Quote   Quote: Originally Posted by IvanS View Post
To make batch file create new txt document. Write code you need inside that document and then go to file save as. When saving use quota marks like "test.bat" and confirm to save. Now you have batch file.

To make that file run on Windows boot do necessary steps
To run a batch file at start up: start >> all programs >> right-click startup >> open >> right click batch file >> create shortcut >> drag shortcut to startup folder.

And yes, change drive letter and path according to your needs
So I tried creating the batch file....
net use V:
if %errorlevel% EQU 0 net use V: /delete
net use V: \\synologynas\movies
(with V being the mapped drive and synologynas\movies being the folder location)
I saved it as you mentioned and all that happened is that the mapped drive was gone after a restart?
My System SpecsSystem Spec
21 Nov 2015   #16
torchwood

W7 home premium 32bit/W7HP 64bit/w10 tp insider ring
 
 
process monitor

My System SpecsSystem Spec
21 Nov 2015   #17
bigbwb

Windows 7
 
 

Well guys after much frustration, I just upgraded to Windows 10. The mapped drives work perfectly now! Problem solved
My System SpecsSystem Spec
Reply

 Mapped drives wont load on startup




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Programs wont load on startup
On my Windows 7 I have 3 programs that should launch on startup, hamachi and DFX never launch and I have to start them manually, and steam which does start, any idea how to fix this? edit: just to be clear these programs are set to load on startup. Thanks.
General Discussion
Windows 7 wont load, Startup blue screens.
There other day my windows 7 computer blue screened, which ultimately led to it not working as it should anymore. I cannot, for the life of me, figure out how to fix the problem and I can't seem to find any sort of system restore. I've tried: Booting into safemode (wont work) Trying the...
BSOD Help and Support
Cannot reconnect mapped drives
Hi all, I apologise if this question has been beaten to a pulp, I just want a 'once and for all' answer. After many google searches, I have yet to find one. I have a windows 7 pc that is part of an office network along with about 5 other machines. They are all supposed to connect to a server...
Network & Sharing
Can't see mapped drives in explorer
On my Win 7 system, I have mapped 4 drives to a XP system using the "net use" command. They are mapped correctly as p,q,s,t on the Windows 7 system. They show up in the "Power Desk" app which is a file manager utility program. The mapped drives work correctly in that program. However, they don't...
Network & Sharing
Mapped Drives Not Accessible
I am unable to edit any files on my mapped drives. I have several directories on C that I have made network shares. I have then mapped the shares to D and E on the same local computer that shares reside. I can edit the files in their original direstories on C. I can also edit these files if I...
Network & Sharing
Mapped drives
We have a linux server and all the Windows 7 Pro workstations have the same mapped drives, w,x,y,z. The only problem is that the path for z is a share nested in another share, w. When we try to map z we get the message, 'Multiple connections to a server or shared resource by the same user, using...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:19.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App