Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Error 'code: 0x80070035 The network path was not found

11 Dec 2009   #11

win7 64
0x80070035 problems

I have a new laptop and an existing desktop.

I did the upgrade to win 7 (64) (laptop, Lenonvo w500 3.06) the other night and have a peculiar problem. when i browse the laptop with my desktop i can see the machine in the browser, but when i try to see any shares on the laptop i get a 0x80070035 error on the desktop, diagnostics (windows networking diags) say the laptop is not communicating on port 445...

Problem does not exist if i use the wireless NIC on the laptop, only if i use the Intel. browsing and sharing from the laptop to the desktop is ok.

I use the 82567LM on the laptop in autosense at 1G

The problem is unlikely to be firewall related as it occurs with or without the windows (only one) firewall enabled or disabled on both machines (unless the windows firewall is not totally disabling)

I upgraded the 82567 driver to the latest on intel's site, still same problem.

Both machines win 7 64 ultimate.

NETBIOS is enabled on all.

My System SpecsSystem Spec
26 Dec 2009   #12

Windows 7

Quote   Quote: Originally Posted by torrentg View Post
Best thing in the world you could ever do is disable DHCP on the router and assign static ip addresses to each network adapter within Windows.

Machines will boot slightly quicker too.

It's the way to run a home network and simple enough to setup. It avoids errors like what you're getting although you should have the ability to run like that if you wish.

To make it even better, places entries for each machine on the network in the hosts file - for each machine. Google it if you don't know what it is. Nothing difficult.
It's basically a local dns cache that your machine follows.

If you still continue to have errors, uninstall all firewalls and antivirus. Do not only disable instead.
OK I am interested in trying absolutely everything. I have installed and uninstalled McAfee at least 4 times. I don't know how to set up separate IP addresses. I have even installed Microsoft Essentials softward to see if that works. Right now I have a Linksys dual band router. Both desktop and laptop are running Windows 7 Ultimate. With the Linksys I am running Network magic and am able to share files. But even though I have a printer (Lexmark X 6570) connected via wifi to my desktop and shared, my laptop will not see it and therefore cannot print to it. It all comes back to this same error code. Error code:0x80070035. So any suggestions that would be helpful. I need the detail proceedure rather than just simply the headlines please. jab
My System SpecsSystem Spec
29 Dec 2009   #13

win7 64

I fixed mine by disabling the ipv6 on the NIC driver... mine was strange cuz the wireless NIC had no problem, but the hardwire NIC had the problem.

FWIW both are intel NICs....
My System SpecsSystem Spec

29 Dec 2009   #14

win7 64

go to the screen that shows the protocols bound to your NIC and uncheck the IPV6 box
My System SpecsSystem Spec
21 May 2011   #15

Windows 7 Ultimate x64

Hey Guys,

Quick question - I know this thread is old, but it's really hurting me not to have this solved. I've read just about every tech support thread I can find.

I've enabled NetBIOS, disabled all my firewalls, used the same name and username for everything and still it won't work.

I tried solution #3 on this site:

0x80070035 Error - Solutions for Vista & Windows 7

It works, but I'm on a dynamic IP and the IP address keeps changing. So I can connect via IP but not computer name.

Any suggestions?

- Derek
My System SpecsSystem Spec
10 Sep 2011   #16

windows 7 home premium 64 bit
corrected same problem

My problem was definitely a firewall problem. Vista laptop has Macafee and the network was set to Public instead of Home.

I changed the setting to Home and all was good. I did this by going into Firewall settings area, clicking on the IP range (dynamic for my router), clicking on EDIT and then setting it to a "Home" network. Everything opened up like a charm immediately afterward.
My System SpecsSystem Spec
11 Nov 2011   #17

7 Professional x64 and 7 Home x64

Disabling ipv6 worked for me. Would like to have a better solution.
My System SpecsSystem Spec
06 May 2014   #18

Remote drive is located in Safe Mode, receives "no path" in full mode

My new laptop W7 Ultimate sees the shared remote drive in safe mode, gets "The network parh was not found" in full user modes. I have gone over all of the suggestions in the above posts and found no problem. We even painstakingly did selective startups with each of optional services diabled.

Any clues from anyone?
My System SpecsSystem Spec

 Error 'code: 0x80070035 The network path was not found

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
ErrorCode 0X80070035 "Network Path cannot be found"
"Error code: 0x80070035 The network path was not found" when trying to access any network shared drives. Our file server is a windows server 2003 standard edition. This problem occured yesterday on my laptop with OS windows 7 pro. I cannot access any shared folders, shared drives. I cannot access...
Network & Sharing
Network Path Not Found Error 0x80070035
Hello. I am new to this forum so please bear with me if I make a few mistakes. I have a problem that I have researched extensively online, but all the posts are quite old, so I will start a new one. Basically, the situation is this: I have three computers on a Private home network one Toshiba...
Network & Sharing
Network path not found error 0x80070035
I have three systems on a home network: one running XP, one running Win 7 32-bit, and the other running Win 7 64-bit. From the XP system, I can see the 32-bit Win 7 system and vice versa. But neither one can see the Win 7 64-bit system. On XP, I get the error: \\Win764System is not accessible....
Network & Sharing
keep dropping network path error 0x80070035
HEy guys So i just added a new server to my home network,and i get insane good speed, however, i keep losing the connection with error 0x80070035 network path not found even though i was just working there. I have to reboot the pcs to make it work again. Sometimes if i wait,connection...
Network & Sharing
Windows cannot access \\COMP 0x80070035 The network path was not found
This particular computer is straight from the factory, and has been working just fine for months. Now, all of a sudden, I can't read two different network paths. The error above keeps coming up, no matter what I do. The computers I'm trying to connect to haven't changed. They're both running...
Network & Sharing
Error Code 0-80070035 the network path was not found. PLEASE HELP!!
I have a lap-top and and a desktop that i am trying to share files between. They are both running windows 7 home premium and the laptop is 64bit and the desktop is 32bit. The desktop is able to access the lap-tops shared files but the lap-top cannot access the desktop however the desktop does...
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:23.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App