Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Changed to new router and now slooooow


03 Dec 2009   #1

7 home premium 64 bit
 
 
Changed to new router and now slooooow

Hi, I had a linksys wrt54g router and bought a d-link dr-615 wireless router. I had pretty good speeds with the g router and now since I've gone to the n router, I don't automatically connect and yes I've checked that, it takes forever to manually connect and the net is slower then the g was?

Help!

My System SpecsSystem Spec
.

03 Dec 2009   #2

7600.20510 x86
 
 

D-Link makes awesome routers. I have the DI-624 rev C.

Update the firmware to latest, from their site.

After, set the router to have TX Rates=Auto, short preamble, Beacon Interval=500 ms, transmit power=100%. If you only have n adapters on the network, set it to n only mode.

Also set the lease time to max allowed.

And that's DIR-615 - here's the latest firmware - http://www.dlink.com/products/?pid=D...tab=3.firmware

Update it from a wired computer.
My System SpecsSystem Spec
03 Dec 2009   #3

7 home premium 64 bit
 
 

OK, first thing I did with the new router was update the firmware. I couldn't find the tx rates but set the others.
Here is my speed now


Here is my speed before with g
http://www.speedtest.net/result/617686087.png
My System SpecsSystem Spec
.


03 Dec 2009   #4

7600.20510 x86
 
 

Do you have WPA2 with AES encryption on? Maybe a neighbor is using your bandwidth if not.

Also, check that your driver setting for the adapter in Windows is set to auto-negotiate for link speed. Use the device manager. Right click it. Properties. Advanced tab.
My System SpecsSystem Spec
03 Dec 2009   #5

7 home premium 64 bit
 
 

My roommates laptop, xp, wireless g yet is getting.............. download 8.74 upload 3.25.

I have wpa and tkip. I don't have an auto negotiate in the advanced tab. I have the newest bios, chipset and drivers for my laptop from HP and 64 bit home premium.
My System SpecsSystem Spec
03 Dec 2009   #6

7600.20510 x86
 
 

Your roomate connecting at the same time might be causing the speed issue due to varying speed standards in use. Make sure nobody else is connected, then test.

WPA with TKIP is not secure and can be hacked in seconds. Use WPA2 with AES. Set a long, random password too.

If all else fails, look into updating the adapter's driver to latest.
My System SpecsSystem Spec
03 Dec 2009   #7

7 home premium 64 bit
 
 

Working much better now but will see how it goes in time. Went to d-link forum and followed "wainbee's" advice on there to set things like so

1. Choose Manual Wireless Setup
2. Disable Wi-Fi Protect
3. Disable Auto Channel Scan - set to CH. 7
4. Set security mode to WPA-Personal
5. Set WPA mode to WPA only
6. Set Cipher to TKIP
Note: no reserved IP addresses, no MAC address filtering or other fancy features employed

Again time will tell.
My System SpecsSystem Spec
04 Dec 2009   #8

7 home premium 64 bit
 
 

Well it was only good for a little while then the lags started and one or the other computer disconnecting.

I fixed though buy hooking up the linksys back up and am taking that piece of crap back and getting my money back. Guess time to do some research on a good (on the cheaper side) router that will work with Windows 7 and support both g and n at the same with no issues for either.
My System SpecsSystem Spec
04 Dec 2009   #9

7600.20510 x86
 
 

When you run a g adapter on the n router, the router will automatically drop to g speeds for all clients. That's how they do.

D-Link makes solid devices.
My System SpecsSystem Spec
04 Dec 2009   #10

Windows 7 Professional 64-bit
 
 

Too bad about the troubles. I'm running a 615 right now with 7 Pro x64 no issues at all. Both N & G are being used and I can stream digital content easily to a WPS N access point to Xbox 360.
My System SpecsSystem Spec
Reply

 Changed to new router and now slooooow




Thread Tools



Similar help and support threads for2: Changed to new router and now slooooow
Thread Forum
Solved Should I purchase a Router/Switch/Modem/Router Network & Sharing
Font changed changed Customization
Turn a normal router into a powerful router Network & Sharing
Need Some Help with Cable Modem to Gray Fox Router to Switch Router Network & Sharing
Wireless N Router + ADSL2 Modem/Router Network & Sharing
changed my router mac address and after i cannot log on Network & Sharing
Best wireless router to replace my wired router Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:26 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33