Issues with Belkin USB network hub

Page 1 of 2 12 LastLast

  1. Posts : 514
    Windows 7 Ultimate
       #1

    Issues with Belkin USB network hub


    Hi.

    I have a Belkin USB Network hub.

    Works like a dream on Windows XP.

    Now I have it on Windows 7 Ultimate 64Bit.

    Works ok when installed. After reboot it doesn't work anylonger.

    Firewall is switched off.

    What could be the culprit ?.

    It's the F5L009 one.

    Wnated devices is seen when W7 starts up, but can nor connect.
      My Computer


  2. Posts : 28,845
    Win 8 Release candidate 8400
       #2

    darkhorse said:
    Hi.

    I have a Belkin USB Network hub.

    Works like a dream on Windows XP.

    Now I have it on Windows 7 Ultimate 64Bit.

    Works ok when installed. After reboot it doesn't work anylonger.

    Firewall is switched off.

    What could be the culprit ?.

    It's the F5L009 one.

    Wnated devices is seen when W7 starts up, but can nor connect.
    Could be homegroup and IPv6. Both are for homogeneous win 7 envirnments only. Create new network based on workgroup model. When up and running you can disable IPv6 and homegroup

    Hope this helps

    Ken J+
      My Computer


  3. Posts : 514
    Windows 7 Ultimate
    Thread Starter
       #3

    Could I ask you to tell me a bit more about how to do this ?.

    Thanks!
      My Computer


  4. Posts : 8,870
    Windows 7 Ult, Windows 8.1 Pro,
       #4

    Possible solutions for your problem in this thread. This is definately a driver or firmware problem.
    Thread about this problem here at this forum.>> Belkin Network USB hub F5L009


    The thread above is talking about your problem and there may be a new driver available for your hub. It says he solved it but you will have to see for yourself. There are also links to the Belkin driver site here. http://en-us-support.belkin.com/app/...etail/a_id/511

    Firmware. http://en-us-support.belkin.com/app/...etail/a_id/510
      My Computer


  5. Posts : 514
    Windows 7 Ultimate
    Thread Starter
       #5

    I have had a look at the links you folks have sent me, thanks you.

    But unfortunately nothing helps me.

    I have also asked Belkin, but so far they have not stuff for Windows 7.

    Curious it is, that a friend of mine that almost run the same set up as I do have the Belkin HUB running just fine on W7 Ultimate.

    I really wonder why I cannot get it to work.

    Mine is working nicely just after the set up, and I have checked the exception in the firewall, and to be sure also have switched off the firewall to no avail.
    This issue is just very boring
      My Computer


  6. Posts : 8,870
    Windows 7 Ult, Windows 8.1 Pro,
       #6

    The only fix for your problem is in the first link I posted. He got it working somehow so I would read that one over and try to make it work. I worked at finding the solution for over an hour so hopefully it is appreciated.
      My Computer


  7. Posts : 514
    Windows 7 Ultimate
    Thread Starter
       #7

    @chev65
    Yes I do appreciate very much your offer. Would try to NAT, as I know the IP of the USB HUB, but what is the ports to be set in there ?
      My Computer


  8. aem
    Posts : 2,698
    Windows 7 Ultimate 64Bit
       #8

    This hub has an IP? is it a hub or a switch or router?
      My Computer


  9. Posts : 514
    Windows 7 Ultimate
    Thread Starter
       #9

    What I talk about is not a 'normal' hub or switch, but my Belkin USB Network HUB connected to my LAN VIA a Netgear switch. And yes the Belkin has got its IP from the DHCP.
      My Computer


  10. aem
    Posts : 2,698
    Windows 7 Ultimate 64Bit
       #10

    Has it completely stop working?

    I would think when you reboot your devices, there is an order that you should do it in. I'm not saying this is 100% accurate but i've heard that if you have a modem to router, shutting down say a modem before the router (or just not shutting down the router) would render conflicts of IPs been routed. In this instance the modem needs to gives the router an IP to route so if it hasn't (during reboot), the router might not refresh etc.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 06:09.
Find Us