Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: WIN7 & XP network access


28 Dec 2009   #11
aem

Windows 7 Ultimate 64Bit
 
 

Comp A
Internet Connection disabled
IP 10.1.1.2
Subnet 255.0.0.0
default gateway 10.1.1.1
DSN server 10.1.1.1

Comp A
Lan Connection enabled says its connected
IP 10.1.1.2
Subnet 255.0.0.0
default gateway 10.1.1.1
DSN server 10.1.1.1

Is this the same computer?

My System SpecsSystem Spec
.

29 Dec 2009   #12

 
 

Yes it is. I have called one computer A and another B. As I said before I have been told only one network can be enabled at any one time on WIN XP and so Previously with WIN XP I would disable the Internet connection before enabling the ethernet LAN connection then after sharing the info I would disable LAN and enable the Internet. This method allowed me to use a single port modem an keep my work computer (B) away from the internet and clean from viruses etc. I am wondering if this set-up will be possible with WIN XP to a Windows 7.
My System SpecsSystem Spec
30 Dec 2009   #13

 
 

Thoughts anyone
My System SpecsSystem Spec
.


30 Dec 2009   #14
aem

Windows 7 Ultimate 64Bit
 
 

I'm confused, what does "Internet Connection disabled" mean, inthe scheme of things?
My System SpecsSystem Spec
30 Dec 2009   #15

Windows 7 Ultimate 32 bit
 
 
Workgroup

You have to make sure both computers belong to the same network name example "my network" in "system properties" "computer name" it will not work unless they are the same workgroup XP uses default name of "MSHOME" and 7 uses "WORKGROUP" so change these to belong to the same group
My System SpecsSystem Spec
30 Dec 2009   #16

Windows 7 Ultimate 32 bit
 
 
Router?

I think that there is a modem being used here and not a router what good is a router with only one port what's it gonna route you really need a router here.
My System SpecsSystem Spec
01 Jan 2010   #17

 
 

"Internet Connection disabled" is done by going to Start>Network connections>Right click on a connection> choose enable or disable. I can only have one network functioning at any one time (the internet connection is considered a network connection) so I enable the one I want to use and disable the one I don't want. My one port modem is called a modem/router (I would assume a router would have 2 or more ports) but I would suggest that the internet portion of my problem is just leading everyone astray, so lets drop it, as it was just to give the bigger picture. Both computers have the workgroup name SWEET. The LAN connection is Ethernet PCL card to Ethernet PCL card cross over cable. As I mentioned this connection was perfect for a WINXP to WINXP connection but I would like to have suggestions if possible on how to get a WINXP to Windows 7 connection to work. Thanks in advance.
My System SpecsSystem Spec
01 Jan 2010   #18
aem

Windows 7 Ultimate 64Bit
 
 

Quote   Quote: Originally Posted by Spuddy View Post
"Internet Connection disabled" is done by going to Start>Network connections>Right click on a connection> choose enable or disable. I can only have one network functioning at any one time (the internet connection is considered a network connection) so I enable the one I want to use and disable the one I don't want. My one port modem is called a modem/router (I would assume a router would have 2 or more ports) but I would suggest that the internet portion of my problem is just leading everyone astray, so lets drop it, as it was just to give the bigger picture. Both computers have the workgroup name SWEET. The LAN connection is Ethernet PCL card to Ethernet PCL card cross over cable. As I mentioned this connection was perfect for a WINXP to WINXP connection but I would like to have suggestions if possible on how to get a WINXP to Windows 7 connection to work. Thanks in advance.
Ok well it's not really an Internet Connection that you are disabling, it's the adapter type. Disabling internet can be either filtering incoming/outgoing requests or a setting from your modem/router.

Anyway can you go into Device Manager. and screen shot these:

1) Your wireless card's Resource tab in Properties.
2) Your 10/100 Ethernet card's Resource & Teaming tabs in Properties.

I wouldnt think these could tell, but something is locking your adapters togerther allowing only one to work at a time.
My System SpecsSystem Spec
01 Jan 2010   #19

Windows7 Ultimate 64bit
 
 

Spuddy, can you make a screenshot of your "Network Connections", the one that says "Local Areal Connection 1", "Local Areal Connection 2", and so on... please make screenshots of both computers. That would help A LOT

zzz2496
My System SpecsSystem Spec
01 Jan 2010   #20

 
 

Here are some images
I have no wireless cards but here are the two resource tabs from WINXP comp
Internet
LAN

Here are the "Network Connections" shots from both comps
WINXP
Windows 7


Attached Thumbnails
WIN7 & XP network access-internet.jpg   WIN7 & XP network access-lan.jpg   WIN7 & XP network access-win7.jpg  
Attached Images
 
My System SpecsSystem Spec
Reply

 WIN7 & XP network access




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:53 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33