|17 Mar 2009||#1|
| || |
Cannot connect to the printer (win7-win7)
I've got installed windows 7 on both pc and netbook computers. On PC it's 7057 64bit and on netbook it's 7022 32bit.
On PC I installed the HP LaserJet 1020 USB printer and it works perfectly. Then I tried to share this printer to netbook. I did check the "Share this printer", entered the name of share "hp1020" also installed additional drivers for x86 and after that hp1020 is visible on netbook but when i want to connect/install this printer on board this message appears:
"Connect to Printer"
"Windows cannot connect to the printer. The print processor does not exist"
Completly don't know what to do? Sharing is working with folders.
I found the button "rint processor" in printers propeties advanced tab and ZIMFPrint (IMF) is checked there. Please help me
|My System Specs|
|26 Mar 2009||#2|
| || |
I posted this on another form, maybe it will help
Print Error 2114 - Printer spooler failed - Cannot connect to Printer network
I have been battling this network printer issue since 7000 became available. This may work with other brands of printers as well.
I am currently running 7022. I have an HP LaserJet 1018 connected locally via USB. Printing locally worked fine. The problem was trying to get remote machines printing to it over the network. After many attempts, trial and error, this is what finally worked.
I have two workstations running Windows 7022. Both were configured as "Work" networks, both in "Workgroup" workgroup. The important thing here is to disconnect your printers before you begin the Windows 7 installation. Once complete, Install the printer using your original printer installation CD that came with the printer. In my case it was the HP installation disk. Run this as adminstrator in Vista Compatability mode.
HP's installation requires you to leave the printer unplugged until it asks to plug it in. This was a bit buggy for me as I plugged in the printer (USB) when it asked but it just sat there scanning for new device. I clicked cancel and the drivers actually installed at this point continuing with the installation, odd. Once complete, I printed a test page OK
Next I disabled Windows Firewall (Private) completely. Ya I know but it was the only way I could get printing to work over the network. I would guess an exception can be made but not real good with windows firewall exceptions
Next I enabled the following: Network Discovery and File and Print Sharing under private network. (These options are located under Network and Sharing then in the left pane click "Change advanced sharing settings)
Next I created a folder called c:\new folder and then shared this giving full control to "Everyone"
Next I shared the printer making sure "Everyone" had "Print" access. (permissions button)
Once I rebooted I checked the event logs and received this error:
"The print spooler failed to share printer HP Laserjet 1018 series with shared resource name HP Deskjet F4100 series. Error 2114. The printer cannot be used by others on the network."
I have not found a solution for this error but was still able to print. Read on.
Moving to the remote Windows 7 workstation now, I made sure network discovery was enabled. I then doubled click network icon on the desktop (you can add this to your desktop by right clicking anywhere on your desktop and choosing "Personalize". Once opened, in the left pane click "change desktop icons" and then tick the Network box and click ok. It should now be on your desktop)
You should now see the primary Windows 7 workstation (printer workstation) listed. Double click to open it. You should now see your shares, the folder that you shared called new folder and then your printer. Right click on New Folder and select map a network drive. Tick both check boxes (Reconnect at logon" and "Connect using different credentials"), click finish. Now click " use another account" and enter username and password from primary workstation (printer workstation) that you normally login with.
Tick the "Remember my credentials" checkbox. click Ok. It should open and you should see the contents of this shared folder which is empty.
Now open Network (icon) again from your desktop and you see the New Folder and and Shared Printer again. Double click to open the Printer. It should now say connecting to printer, taking some time to install the printer driver from the other computer. At this point it should then open the print queue that is empty. Your printer is now added in your Hardware devices and set to default printer. Open your hardware devices right click on printer, choose printer properties and print test page. It should now print.
During all of my previous installs I left the printer connected during Windows 7 installation which windows found and installed. I suspect a driver issue with the windows driver for the hp printer. It is possible you can download the driver from the printers website but I did not have much luck with just the DRIVER download. I needed the setup wizard which asked me to plug in the printer at a certain point.
One other tip to try if you still have problems. On the remote workstation, click to add a new printer and make it local even though it is not connected. When asked which type of printer (list) select Have Disk and then point to the driver files from your installation cd (or if you downloaded them, make them available on the remote printer and point to this location) Finish the printer setup, then open Hardware Devices and delete the printer. Although you deleted the printer the drivers are still installed. Try the above steps again to print
Well, if you are having similar printing issues over your network, give this a try and hopefully it will work for you as well.
|My System Specs|
|30 Mar 2009||#3|
| || |
Dell and many of those company's that make printers never even bothered to make Vista drivers for my older but still very functional Dell printer so I never got it work with Vista at all.
Usually you need drivers made for the OP system specifically in order to print from that machine. These printer company's purposely don't make drivers for newer Op systems because they want you to buy a new one every time you install another OP system which is rediculous.
The only way for me to print from my Vista or Windows 7 machine is to move the file to the older XP machine using the network sharing folders and then print from the older XP machine.
|My System Specs|
|Similar help and support threads for2: Cannot connect to the printer (win7-win7)|
|Win7-Win7 printer sharing; connect to printer access denied||Network & Sharing|
|Win7 Crashing,will not connect printer,run software.SF log attached||BSOD Help and Support|
|Unable to connect the printer (hosted on the XP) from the Win7 64bit||Hardware & Devices|
|New Win7 connect 2 WinXP computer's printer.||Hardware & Devices|
|Connect two Win7 with Belkin Easy Transfer Win7||Hardware & Devices|
|32-bit IE won't connect on Win7 64-bit||Browsers & Mail|
|Shared Win7 Printer-no connect from VistaPrem if no psw||Network & Sharing|
|Our Sites ||Site Links ||About Us ||Find Us |
© Designer Media Ltd
All times are GMT -5. The time now is 02:31 AM.