New
#1
Can't browse network
I run a rocket raid card with 2 sata's in raid 1. I installed another sata hd yesterday to the regular bus. I am able to read and write to it with no issue.
First I found that when I turn on my usb drive it does not allocate a drive letter and I cannot see it in my computer. It was drive J and now the internal drive has taken the letter J. The usb drive should have installed as K. I was going to do a lastdrive=z in config.sys but it would not let me save it.
Next I discovered that I cannot browse to my win 2000 server over the network. This has never been an issue before. I have my user on the server and my 7 install auto logs into my account with the correct password that accesses my server. It always used to just browse without asking for credentials as the credentials are the same on my 7 machine and the server, just as it should.
When I click on the server, windows security asks me for username and password. I enter the info correctly and it says it is incorrect. I CAN connect with remote desktop with the same credentials and I can log in locally to the server with the same credentials.
I unhooked the new sata drive and turned off the usb drive but no change. Then I tried a system restore to just before the hd was installed. Now when I turn on the usb drive it installs and I can access it but I still cannot browse the server as it still wants credentials but will not accept them as correct.
I also tried adding a new user on the server in the admin group, but these credentials do not work when I try to browse either.
Any ideas out there what happened?