Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: need help setting up something

01 Feb 2010   #1
shadyboy039

Windows 7
 
 
need help setting up something

i dont know know if this is the right forum but i think its close enough. btw im new the forum so hi. anyway does anyone know how to make a computer accept incoming wireless connections on windows 7?

thanks


My System SpecsSystem Spec
.
01 Feb 2010   #2
aem

Windows 7 Ultimate 64Bit
 
 

Hi and Welcome,

I guessing you could be thinking about adhoc wireless networking off your W7. This allows your W7 to host incoming wireless connections.
My System SpecsSystem Spec
01 Feb 2010   #3
shadyboy039

Windows 7
 
 

well its not exactly for another computer so ad-hoc wont do the trick. im kinda trying to make it work with gadgets like a DS lite for example. i was told that if can make it accept incoming wireless connections and then bridge the it with my current connection it should work but i have no clue how to make it accept incoming wireless connections. and yes i realize that a router would be the fastest option i just dont have the money for a cheap router.
My System SpecsSystem Spec
.

01 Feb 2010   #4
aem

Windows 7 Ultimate 64Bit
 
 

Ad-hoc connection doesn't have to be for a computer. If the incoming device has internet connection capabilities, it can connect to W7 through ad-hocing. If you want to bridge, then you need to have the LAN adapter connected the internet and then use that cnnection to bridge your ad-hog wireless connection.
My System SpecsSystem Spec
01 Feb 2010   #5
shadyboy039

Windows 7
 
 

well im trying it with my DS lite right now and im getting an error code. even though my PC says internet connection sharing is enabled. something doesnt seem right.
My System SpecsSystem Spec
01 Feb 2010   #6
aem

Windows 7 Ultimate 64Bit
 
 

You created the ad-hoc wireless connection, and you see "Waiting for users..." on the wireless network. You then have the DS lite searchs, finds and connects to this ad-hoc network. Can you confirm these actions?
My System SpecsSystem Spec
01 Feb 2010   #7
shadyboy039

Windows 7
 
 

yea. i get an error code 51301 on the ds.
My System SpecsSystem Spec
01 Feb 2010   #8
aem

Windows 7 Ultimate 64Bit
 
 

My System SpecsSystem Spec
01 Feb 2010   #9
shadyboy039

Windows 7
 
 

ok i just finished trying 64-bit and 128-bit and nothing is working only thing is i get a 51300 error in slot one. i googled it and i got the same fix for this error code. i wouldnt know how to do the mac filtering fix and the first fix when using ad-hoc so i guess im kinda stuck.
My System SpecsSystem Spec
01 Feb 2010   #10
aem

Windows 7 Ultimate 64Bit
 
 

The MAC filtering an option on your Router. However, since your wireless network is off the machine (W7), you won't need to worry about it. Are you saying your machine cannot connect to the internet?
My System SpecsSystem Spec
Reply

 need help setting up something




Thread Tools




Similar help and support threads
Thread Forum
Windows 7: Can't change setting System Properties > network ID setting
I am trying to add a refurbished HP system to my menagerie. It had Windows 7 Pro (64bit) installed when I got it. I went through the setup without any problems, created a user account for myself (Lewis), set the system name to TestPC and started installing and testing some software. Simple...
Network & Sharing
Can't change setting System Properties > network ID setting
I'm trying to set up a Synology NAS for my home network, however I can only access via the Synology utility and through a browser using the internal IP address. It does not otherwise appear on my network; I can't ping it, map drives to it by any method, etc. Googling suggests that this problem...
Network & Sharing
Setting the “num lk” to be ON,
Setting the “num lk” to be ON, I’m wondering which setting of windows/Bios that switch the “num lk” to be ON as the machine starts. Originally, I couldn’t figure out why this “num lk” is for? Who needs it to be off? Mine is windows 7 64 bits Thank you
General Discussion
Registry Setting, Group Pollicy Setting, Explanation
Not everyone will be interested, but: I've found a reference to a MSDN site which provides useful info. Did you ever want to know or need to know the correspondence between a registry setting and a group policy setting? I just wish this had existed earlier. I'm giving the link to John...
Performance & Maintenance
Setting Up a VPN
I recently downloaded and installed a VPN but when I try to connect to it I get error messages saying check firewall settings and check if I have an internet connection which I do have. My problem is I have used another VPN a while ago but I had to install OpenVPN first then the VPN program but...
Network & Sharing
UAC setting
I turned off the uac setting a couple of months ago and I want to turn it back on (to the third setting from the top). It will let me move the pointer and click the ok button, but when I go back to the uac setting menu it still shows off (even after restarting the computer). Is there any idea how...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 04:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App