Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 LAN Setup


25 Feb 2010   #1

Vista Ultimate 32-bit
 
 
Windows 7 LAN Setup

I have 2 PC's using at home.

I have a router and a switch. Router is DHCP enabled. Both my PC's are in DHCP clients.

Now, i test ping my PC-1 to PC-2 and it's ok but when i test ping PC-2 to PC-1 it shows "request timed out". They have the same WORKGROUP, subnet mask and gateway of course.

What's wrong with my SETUP?




Attached Thumbnails
Windows 7 LAN Setup-lan.jpg  
My System SpecsSystem Spec
.

25 Feb 2010   #2

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by grungero View Post
I have 2 PC's using at home.

I have a router and a switch. Router is DHCP enabled. Both my PC's are in DHCP clients.

Now, i test ping my PC-1 to PC-2 and it's ok but when i test ping PC-2 to PC-1 it shows "request timed out". They have the same WORKGROUP, subnet mask and gateway of course.

What's wrong with my SETUP?
Both machines win 7? using IPv4 or IPv6? does manually assigned IP work? Try ipconfig /release then ipconfig /renew


Ken
My System SpecsSystem Spec
25 Feb 2010   #3

Vista Ultimate 32-bit
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post

Both machines win 7? using IPv4 or IPv6? does manually assigned IP work? Try ipconfig /release then ipconfig /renew


Ken
Both machines is Windows 7. I'm using IPv4 and disabled IPv6. Manually assigned don't work.

Ok i will try and will let you know.
My System SpecsSystem Spec
.


25 Feb 2010   #4

Vista Ultimate 32-bit
 
 

Still no luck.

The one i'm using now is PC-1.
My System SpecsSystem Spec
25 Feb 2010   #5

Windows 7 Professional 64bit
 
 

What do you mean manually assigned addresses dont work? Could you post the IP address, subnet, gateway and DNS address that you are using on both machines?
My System SpecsSystem Spec
25 Feb 2010   #6

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Hydrology View Post
What do you mean manually assigned addresses dont work? Could you post the IP address, subnet, gateway and DNS address that you are using on both machines?
What about firewalls, and av on both?
My System SpecsSystem Spec
25 Feb 2010   #7

Vista Ultimate 32-bit
 
 

Code:
Windows IP Configuration

   Host Name . . . . . . . . . . . . : GrungerO-PC
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection 3:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Realtek RTL8168/8111 PCI-E Gigabit Ethern
et NIC
   Physical Address. . . . . . . . . : 00-1C-25-39-77-BE
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 192.168.1.10(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Friday, February 26, 2010 12:14:03 AM
   Lease Expires . . . . . . . . . . : Friday, February 26, 2010 2:14:02 AM
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCP Server . . . . . . . . . . . : 192.168.1.1
   DNS Servers . . . . . . . . . . . : 121.1.3.81
                                       121.1.3.16
   NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{A18CA08E-6D6B-4C98-9C01-03877FB7B9F9}:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 12:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:cf2e:3096:1055:1c6e:3f57:fef5(Pref
erred)
   Link-local IPv6 Address . . . . . : fe80::1055:1c6e:3f57:fef5%14(Preferred)
   Default Gateway . . . . . . . . . : ::
   NetBIOS over Tcpip. . . . . . . . : Disabled
Firewall of both machines is off.
My System SpecsSystem Spec
25 Feb 2010   #8

Vista Ultimate 32-bit
 
 

Solved it. I just uninstalled my AV.

I can view my homegroup but can't access it. Here is the error.

Please help guys!


Attached Images
 
My System SpecsSystem Spec
Reply

 Windows 7 LAN Setup




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:34 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33