Win 7 Pro x64 slow to set up network connection


  1. Posts : 1
    Windows 7 Professional 64-bit
       #1

    Win 7 Pro x64 slow to set up network connection


    I have Windows 7 64-bit connecting to a hybrid Windows/samba network.

    On boot, Win7 takes 1 - 2 minutes to negotiate a DHCP lease; set to a static, it takes about the same amount of time to connect. Other Vista and XP PCs connect in seconds. I have tried:

    • Replacing the switch
    • Enabling Spanning Tree Protocol and Fastport on the switch
    • Replacing the DHCP server/gateway
    • Updating the Win7 NIC drivers
    • Selectively disabling components in startup (removing the Nero components helped a bit)
    • Disabling IPv6 and Link Layer Topology drivers in Local Area Connection properties
    • Changing from one firewall (Forticlient) to another (COMODO) - both 64-bit

    I've searched high and low for other solutions, but no success. Any advice would be appreciated.
      My Computer


  2. Posts : 7
    Windows 7 Professional 64bit
       #2

    I'm having the exact same issue. I've tried all these, also. Even a format and reload and still get the same results.
      My Computer


  3. Posts : 1,325
    Windows7 Ultimate 64bit
       #3

    ironstone said:
    I have Windows 7 64-bit connecting to a hybrid Windows/samba network.

    On boot, Win7 takes 1 - 2 minutes to negotiate a DHCP lease; set to a static, it takes about the same amount of time to connect. Other Vista and XP PCs connect in seconds. I have tried:

    • Replacing the switch
    • Enabling Spanning Tree Protocol and Fastport on the switch
    • Replacing the DHCP server/gateway
    • Updating the Win7 NIC drivers
    • Selectively disabling components in startup (removing the Nero components helped a bit)
    • Disabling IPv6 and Link Layer Topology drivers in Local Area Connection properties
    • Changing from one firewall (Forticlient) to another (COMODO) - both 64-bit

    I've searched high and low for other solutions, but no success. Any advice would be appreciated.
    Connect to where?

    zzz2496
      My Computer


  4. Posts : 7
    Windows 7 Professional 64bit
       #4

    To connect to anything Wireless or wired. Doesn't seem to matter if I'm pulling DHCP or have a static. It always takes 1-2 minutes before I can use the connection.
      My Computer


  5. Posts : 1,325
    Windows7 Ultimate 64bit
       #5

    Hmm, that's weird... Mine just connects, you sure it's not driver related? Check resource monitor...

    zzz2496
      My Computer


  6. Posts : 7
    Windows 7 Professional 64bit
       #6

    It's doing it on wireless and wired. Updated both drivers and the problem still exists. Seems to only be a 64 bit issue.
      My Computer


  7. Posts : 7
    Windows 7 Professional 64bit
       #7

    Forticlient VPN software was the problem. After uninstalling and reinstalling I still had the issue. I then installed latest version of Forticlient and uninstalled both wireless and wired card. Rebooted and everything works great.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 20:38.
Find Us