Homegroup issue

Ok, I did some looking around and couldn't find a thread that dealt with this yet. I may have missed it and if I did a link to the thread would be helpful and you have my apology for posting about something that has already been solved.

That being said here is my issue:

I just got my Homegroup set up yesterday I have 5 computers connected (3 wireless and 2 wired), the problem is that one of the computers can only see select computers on the homegroup and all i can do is see the folders that I can access. If I try to open the folders the computer acts like its doing something for a few seconds and then it just stops and doesn't open the folder. I checked to make sure all folders were shared and double checked my antivirus and firewall to make sure that they allowed it as well, even though the other computers on the homegroup can see each other and access all shared folders...even the shared folders on the one computer that cannot access anything which I thought was strange. I hope that I was clear in my description of the problem if not I will be glad to clarify.

Product FRED said:

Switch from homegroup to workgroup and disable IPv6 in your LAN connection properties. That should do it.

So I should switch all the computers from homegroup to workgroup or just the one that is having trouble? Clearly I need to spend more time learning this new OS. This is also the first time I have set up an entire network with a purpose other than accessing the internet to surf the web, and I am learning quite a bit from this experience as well. I think when I get my HTPC set up with easy access to my media I will get into the OS exploration and I will be spending a lot of time reading these forums as well.

Actually there are many ways to fix this problem and getting rid of Homegroups isn't one of them.

This can be one of two problems.
1. Click Start. Search for run and press enter. In the field, type regedit and press OK.

2. In the registry, navigate to the following key.

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters]
HKEY_LOCAL_MACHINE
\SYSTEM
\CurrentControlSet
\Services
\Tcpip6
\Parameters

3. In the right pane, right-click on “DisabledComponents” and select modify. In the value data field, type “0″ (without quotations) and press OK. If the value was set to ``FF``, it was turned off.
4. Reboot your computer and it should work. It did for me.

Or try this.... Go to C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking and delete all of the files in this folder. Now restart the computer.

Other things to check...

Why can’t I access my HomeGroup?



There are several reasons why you can’t access your HomeGroup. Here are the most popular reasons for not being able to connect to your HomeGroup.

• Your computer might not be connected to the network the HomeGroup is on. Make sure the computer has network/Internet access. Try having Windows 7 troubleshoot the Internet connection for you.
• Your network location might not be set to Home. Learn how to check and change your network location if needed.
• Network Discovery might be turned off. Learn how to turn Network Discovery back on.
• Other computers in the HomeGroup might be turned off.
• Other computer in the HomeGroup might not be sharing files. Learn how to share files using HomeGroup.
• Maybe someone changed the HomeGroup password. Try checking the HomeGroup password on other computers in the HomeGroup. If the HomeGroup password was changed, change the HomeGroup password on your computer.
• Your computer might not yet be joined to a HomeGroup. Learn how to join or create a HomeGroup.
• Turn off any third party firewalls (usually bundled with antivirus software) that are installed on your computer.

If none of these troubleshooting tips work, try restarting your computer, or leave and then re-join the HomeGroup.


Check list for Homegroups, very good info here.
http://helpdeskgeek.com/windows-7/wi...-to-homegroup/

chev65 said:

Actually there are many ways to fix this problem and getting rid of Homegroups isn't one of them.

This can be one of two problems.
1. Click Start. Search for run and press enter. In the field, type regedit and press OK.

2. In the registry, navigate to the following key.

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters]
HKEY_LOCAL_MACHINE
\SYSTEM
\CurrentControlSet
\Services
\Tcpip6
\Parameters

3. In the right pane, right-click on “DisabledComponents” and select modify. In the value data field, type “0″ (without quotations) and press OK. If the value was set to ``FF``, it was turned off.
4. Reboot your computer and it should work. It did for me.

Or try this.... Go to C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking and delete all of the files in this folder. Now restart the computer.

Other things to check...

Why can’t I access my HomeGroup?




There are several reasons why you can’t access your HomeGroup. Here are the most popular reasons for not being able to connect to your HomeGroup.

• Your computer might not be connected to the network the HomeGroup is on. Make sure the computer has network/Internet access. Try having Windows 7 troubleshoot the Internet connection for you.
• Your network location might not be set to Home. Learn how to check and change your network location if needed.
• Network Discovery might be turned off. Learn how to turn Network Discovery back on.
• Other computers in the HomeGroup might be turned off.
• Other computer in the HomeGroup might not be sharing files. Learn how to share files using HomeGroup.
• Maybe someone changed the HomeGroup password. Try checking the HomeGroup password on other computers in the HomeGroup. If the HomeGroup password was changed, change the HomeGroup password on your computer.
• Your computer might not yet be joined to a HomeGroup. Learn how to join or create a HomeGroup.
• Turn off any third party firewalls (usually bundled with antivirus software) that are installed on your computer.

If none of these troubleshooting tips work, try restarting your computer, or leave and then re-join the HomeGroup.


Check list for Homegroups, very good info here.
http://helpdeskgeek.com/windows-7/wi...-to-homegroup/

Holy...wow! I will give this a try before I get rid of the homegroup and start a workgroup. it will have to be put on the back burner for right now though because when I went home yesterday to do some work on my computer I couldnt get anything to run. I know I should start another thread for this but seeing as its my own thread anyways and I have some people already replying I will throw it out there.
When I booted up my computer yesterday morning to do some video work every program that I started up would stop responding and I couldn't close it out. I tried task manager and end task, I also tried ending the process for the program in the process menu and neither way worked. So I restarted my computer, also I had to change my boot order from CD-HDD-Other to HDD-CD-Other because it wouldn't boot up for some reason, after the reboot the same thing would happen, I tried 5 different programs and the same happened with all of them. Suprisingly the only thing that would work right is my internet browsers( I checked both IE8 & Firefox), I could start them up visit websites and watch videos on youtube, listen to streaming music and when I was done I could close it out and it didn't hang or stop responding at all. Also another thing to note is that my CPU and RAM never spiked at all, during any of these program freeze-ups. Any thoughts?

Well it certainly gives you more options than just getting rid of Homegroups now doesn't it? Hopefully you will get back to this and get Homegroups working. There are zero reasons not to use Homegroups if you are running Windows 7 machines.

Product FRED said:

chev65 said:

Well it certainly gives you more options than just getting rid of Homegroups now doesn't it? Hopefully you will get back to this and get Homegroups working. There are zero reasons not to use Homegroups if you are running Windows 7 machines.

Compatibility is one of the reasons not to. Switching to workgroup is the most immediate fix, usually.

There should be no compatibilty issues though because all the computers are running either x86 or x64 versions of windows 7. Oh well, I will give Chev65's method a try as soon as I figure out what is going on with my main machine.