Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win7 as a host for VPC - Network card no recognized

23 Apr 2009   #1
Suthi

Win7 7077
 
 
Win7 as a host for VPC - Network card no recognized

I've just isntalled VPC over Win7 7077 but on the network settings I cant choose my LAN connection, I only have the option of Shared NAT?

Is there any problem reported regarding this subject?


My System SpecsSystem Spec
.

23 Apr 2009   #2
jimbo45

Linux CENTOS 7 / various Windows OS'es and servers
 
 

Quote   Quote: Originally Posted by Suthi View Post
I've just isntalled VPC over Win7 7077 but on the network settings I cant choose my LAN connection, I only have the option of Shared NAT?

Is there any problem reported regarding this subject?
Might be related -- with VMWARE the NAT service doesn't work properly -- but you can use BRIDGED which gets round the problem. No good however if you only get a single fixed IP address however as BRIDGED will use another "Real" IP address.

Cheers
jimbo
My System SpecsSystem Spec
23 Apr 2009   #3
Suthi

Win7 7077
 
 

well I figure it out..

The VirtualPC instalation didnt had activated the protocol under the network connection properties..

tnks anyway for the feedback jimbo45
My System SpecsSystem Spec
.


Reply

 Win7 as a host for VPC - Network card no recognized




Thread Tools





Similar help and support threads
Thread Forum
Network adapter not recognized after win7 install. Lenovo T430
Lenovo T430 running win7 home premium 64bit. Wife purchased new in 2013 and it has been problematic almost from the get-go. The machine was very slow to operate, slow to execute various mouse commands and such. The machine had some sort of warning message pop up in constantly the lower left ...
Hardware & Devices
Network card recognized only after first reboot of the day
Hi guys/gals, On one of our computers there is something very : recently, the system has been reinstalled, W7x64 Pro, with all appropriate drivers from official websites, like Intel chipset, networking etc. The problem is following: turn on the computer in the morning, there is no network...
Network & Sharing
USB 3 PCIe card, NEC USB 3 host controller not found?
WIN 7 Ultimate, 64 bit, ASUS M3A78-EM Motherboard. I built my PC about 3-4 year ago using the above MB and OS and I am very happy with it. I recently decided to install a 4 port, front, USB 3 hub. The MB doesn't directly support USB 3 but does have a PCIe 2 slot. I purchased from...
Drivers
What is a good wireless network card for Win7?
Is i better to ger a PCI one these days or USB? Which one is likely to give the best reception? I had a Belkin 56g PCi card before, that was ok.
Hardware & Devices
Virtual PC cannot see host network
I have done as you instructed. The WinXP VPC I set up can see the internet but for some reason it does not see the host Windows 7 machine. When I ping the host from the VPC I get no response. I can ping the VPC from the host machine. I intend to run the ArcInfo license of ArcGIS Desktop on the VPC....
Virtualization
SATA host card
picked up a sata host card a while back just now needing to use it looking to us a ssd for a boot drive and move another drive from the board to the card. With the card in the pci slot everything works normal when I connect a hdd to it it causes the entire system to become very slow (can't even...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 14:50.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App