Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Speedtouch 330 causes bsod when running tripple channel

10 Apr 2010   #1
ecks

Windows 7
 
 
Speedtouch 330 causes bsod when running tripple channel

What title says basically. If i use tripple channel memory it will cause a Bsod with the IRQL_Not less or equal. If i don't have the usb cable plugged in it works fine. If i Only the 2 ram slots or the 3rd one in the blue one ( but then only 4gb are usable ) then it will work fine.

I should note i just set this system up on friday. It was working fine before and only gives me a headache when i run tripple channel. I've tried different ports and added other usb devices but they don't give this headache.

Anyone know of this issue?


My System SpecsSystem Spec
.
11 Apr 2010   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by ecks View Post
What title says basically. If i use tripple channel memory it will cause a Bsod with the IRQL_Not less or equal. If i don't have the usb cable plugged in it works fine. If i Only the 2 ram slots or the 3rd one in the blue one ( but then only 4gb are usable ) then it will work fine.

I should note i just set this system up on friday. It was working fine before and only gives me a headache when i run tripple channel. I've tried different ports and added other usb devices but they don't give this headache.

Anyone know of this issue?

We actually the dmp file created when the system crashed. Use these to find and upload it to us. http://www.sevenforums.com/crash-loc...d-problem.html


Thanks

Ken
My System SpecsSystem Spec
11 Apr 2010   #3
ecks

Windows 7
 
 

Here is the bios file

hope it helps
My System SpecsSystem Spec
.

12 Apr 2010   #4
CommonTater

XP Pro SP3 X86 / Win7 Pro X86
 
 

Quote   Quote: Originally Posted by ecks View Post
What title says basically. If i use tripple channel memory it will cause a Bsod with the IRQL_Not less or equal. If i don't have the usb cable plugged in it works fine. If i Only the 2 ram slots or the 3rd one in the blue one ( but then only 4gb are usable ) then it will work fine.

I should note i just set this system up on friday. It was working fine before and only gives me a headache when i run tripple channel. I've tried different ports and added other usb devices but they don't give this headache.

Anyone know of this issue?
A small lesson in life...

A guy walks into his doctor's office, hooks his thumb over the edge of the desk, pulls out a hammer and smashes his thumb...

"Doc, it hurts like $%%^ whenever I do that!!"

The doctor answers...

"Then, don't do that."
My System SpecsSystem Spec
Reply

 Speedtouch 330 causes bsod when running tripple channel




Thread Tools




Similar help and support threads
Thread Forum
Any drawbacks to mixing single-channel and dual-channel for RAM?
Hi, I currently have 2x2GB Corsair DDR3 1333MHz RAM which I had bought around 3 years ago. I am currently thinking of upgrading to 8GB. However, my vendor tells me that 2GB sticks are no longer available for Corsair and that I have to either get a 4GB or 8GB stick. My current 2x2GB runs in...
Hardware & Devices
Dual Channel Suddenly Stopped Working, Only Single Channel Remains
Hey everyone http://m.bestofmedia.com/sfp/images/design/usr/smilies/smile.gif I got a bit of a problem here, and I'm at a loss on what to do to fix it. Some background about the situation would be a good place to start. A few days ago I came home from work and found my PC in a "lights are...
Hardware & Devices
3 GB DDR3 , tripple channel
Hello guys. I wanna change from x86 to x64 Winfdows 7,but i need your advice. Now i have 3 GB DDR3,in tripple channel. You think its ok if i get 1 more GB DDR3? Should i go for 3 mor GB DDR3 ?? If i get only 1 GB RAM DDR3, its going to 'affect' the performance of tripple channel ? Thanks.
Hardware & Devices
My Speedtouch 330 bsods when i use tripple channel.
Okay heres the log from my dump files hopefully it will help you guys to find the root of the issue. My original Thread " What title says basically. If i use tripple channel memory it will cause a Bsod with the IRQL_Not less or equal. If i don't have the usb cable plugged in it works fine....
BSOD Help and Support
Speedtouch 330 driver
Is there a driver for speedtouch 330 USB ADSL Modem ? thanks
Drivers
Channel 9 to swallow Channel 8, Channel 10, Coding4Fun
Channel 9 is being renamed "Revolution 9," which will swallow up the Channel 8, Chanel 10, and Coding4Fun websites. Full Story: Channel 9 to swallow Channel 8, Channel 10, and Coding4Fun - Ars Technica
News


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:51.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App