Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: IRC and Event Viewer Logs Indicating Network Issue?

11 Apr 2010   #1
MadMax1412

Windows 7 Professional 64-bit
 
 
IRC and Event Viewer Logs Indicating Network Issue?

Guys,


I'm currently having an issue with my Win7 64 bit Pro computer.

Transfers to other computers on my network is slow and sometimes the icon in the taskbar shows that it's disconnecting and reconnecting. I've also noticed that uploads to the internet are either slow or just never complete as the network keeps resetting.

I've also noticed in the System Event Viewer, for the past hour:


  • 355 Service Event Errors ID # 7036 (4439 occurrences in 7 days); and
  • 177 for Service Event Error ID 7042 (1165 occurrences in 7 days)


ID 7036 messages alternate between:


The TCP/IP NetBIOS Helper service entered the stopped state.
and
The TCP/IP NetBIOS Helper service entered the running state.


ID 7042 has messages reading:
Quote:
The TCP/IP NetBIOS Helper service was successfully sent a stop control.
The reason specified was: 0x40030011 [Operating System: Network Connectivity (Planned)]
The other event message which occurs a lot is event 8033 which has 207 occurrances over the past 7 days. It reads:
Quote:
The browser has forced an election on network \Device\NetBT_Tcpip_{180E5F8A-7005-4484-A0D4-553607321AC0} because a master browser was stopped.
Does the screenshot here http://i989.photobucket.com/albums/a...x_1412/IRC.jpg indicate a conflict on IRQ 16. If so, would that have an impact on these disconnections.


I believe this might be the underlying cause of my slow transfer speeds to my NAS box getting worse as time went on. When I first installed Windows 7, I was getting very good transfer speeds with the occasional slow one, but now I rarely get a good connection on my LAN.


I've installed the latest Realtek Network drivers from the Gigabyte (motherboard) site plus disabled the unused NIC connector.


My System SpecsSystem Spec
.

12 Apr 2010   #2
Packet

Windows 7 Ultimate x64
 
 

Nvidia chipset?
(if it is, you need to install the drivers)

if not, other options are to set a static IP instead of DHCP and / or 'force' the drivers to be installed instead of using the ms ones for the nic
My System SpecsSystem Spec
12 Apr 2010   #3
MadMax1412

Windows 7 Professional 64-bit
 
 

Thanks.

When you talk of the chipset, is this the Mobo chipset or the NIC card? If it's the mobo, then I have the Gigabyte GA-EP45-DS3 ( http://tinyurl.com/3oyb5p ) so I guess the answer is Yes?? About 5 days ago I downloaded all the updated drivers (chipset, audio, Lan, etc) from Gigabyte and installed them (other than the audio).

The IP address normally is set to 192.168.1.1 but a few days ago, realised it was set to Auto as there was a conflict with my network media player when I turned it on.

I've tried to change the IRQ but it has a tick in "Use Automatic Settings" and this is greyed out so I can't remove the tick.
I've tried booting into safe mode but can't change the IRQ there.
How do I do it?


For a while there I had no LAN or internet access but it eventually worked (partly). Icon is showing a yellow exclamation mark and the network map shows "This Computer" to "Network" ok but from "Network" to "Internet" is out. The weird thing is that I can browse the internet, download emails and view network drives on my LAN.
The other thing that is cheesing me off is that it says IPv6 isn't enabled and therefore I can't join a work group but the tick is enabled under that NIC's properties.
My System SpecsSystem Spec
.


13 Apr 2010   #4
Packet

Windows 7 Ultimate x64
 
 

OK so it's an Intel chipset (the motherboard chipset) ...so yes, it seems you have the drivers installed.

you dont have to change the IRQ (your bios sets them auto on each boot and chances are you wont be able to assign anyway)

and i finally got to see your screenshot - that's not an issue - IRQ sharing is OK.

0x40030011 [Operating System: Network Connectivity (Planned)] is what i couldnt figure out.

if you type 'ipconfig /all', you should see the ipv6 stuff enabled.

i think i may have a fix - manually set the speed and duplex on your card to be say 100 Full Duplex - read on another forum how that resolved some issues for them
My System SpecsSystem Spec
13 Apr 2010   #5
MadMax1412

Windows 7 Professional 64-bit
 
 

Quote   Quote: Originally Posted by Packet View Post
i think i may have a fix - manually set the speed and duplex on your card to be say 100 Full Duplex - read on another forum how that resolved some issues for them
Hi,

I have tried that a few weeks back went I started getting very slow LAN transfers between my Win7 computer and my WinXP and Thecus N2200 NAS box.

I'm now at the point of waiting until I have about 15 TV shows on my Win7 computer and then connecting it to the WinXP computer via Cross Over cable, transferring to WinXP, reconnecting LAN cables to both boxes and transferring from WinXP to N2200. I have to do this to watch my TV shows remotely as my Zensonic/Ziova Network Media Players can see my Win7 computer but say there's no shares on it. (That's a whole other problem).

I'm at work at the moment, but I'll try setting the speed again (if it's not already been changed from "Auto Negotiate") when I'm home.
My System SpecsSystem Spec
Reply

 IRC and Event Viewer Logs Indicating Network Issue?




Thread Tools





Similar help and support threads
Thread Forum
Event Viewer Reading Backup Logs Instead of Original
Windows Home Premium SP1 64 bit When opening Win 7 Event Viewer, in the Summary of Administrative Events window, it's reading the "Microsoft windowsbackup/ActionCenter log". Shouldn't it instead be reading the original logs? Application, System, Security, etc. ? When I click on these logs...
Performance & Maintenance
After BSOD Event Viewer Logs Event ID 3012 and 3011 every time I boot
I was running 3DMark06 and got a BSOD code 124. After that every time I boot Event Viewer logs Error Codes ID 3012 and 3011. Attached are screenshots of both. I googled this and found two different threads where someone suggested to rebuild the performance counters. Both responses were...
BSOD Help and Support
PC crash description. With event viewer logs, please help
My computer crashes while watching video or playing games (even css) at least twice a day. It just goes to black or fuzzed screen, light dies from keyboard and makes real hard to describe sound. (not like a loop, I don't think anyway) I have a feeling its my graphics card as its old as compared to...
General Discussion
Event Viewer: New Entries Under App. & Service Logs -> Microsoft
hi all, i always check my boot time from event manager following this pattern: Event viewer -> Applications and Services log -> Microsoft -> Windows -> Diagnostic Performance -> Operational off late, i have noticed under Microsoft i get another entry along with Windows. it is IEResp....
BSOD Help and Support
Event Viewer Logs - Size Adjustments
Hi all: Being compulsive about the efficiency of things, from time to time I Clear the Event Viewer Logs. 1: Left alone, how big will these things get? I see 7000+ entries at times! 2: Does clearing them out make sense? No? 3: Is there a way to set an upper limit on their sizes? TIA,
Performance & Maintenance
Event viewer logs
Hi guys For the last 4 weeks i get the following 4 errors at boot in the event viewer never get anything else just these.Can anyone translate the squiggles for me and tell me if there is anything to be worried about or not Thankyou
Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App