New
#1
Can't configure D-Link wireless repeater properly
Since my return from near non-existence, my parents bought another router to (extend/repeat the wireless signal).
Here is what I have and what I've done so far...
D-Link DIR-655 Xtreme N Gigabit Router (updated firmware version: 1.34NA 2010-04-16)
and
D-Link DAP-1360 Wireless N Range Extender (firmware Version: V1.02 2009-10-09)
used WPS (Wi-Fi Protected Setup) was added successfully, but the issue is I cannot seem to copy the mac address from the DIR-655 to the DAP-1360, so when you seek a wireless connection in my household, you see 2 different wireless signals, when all I should see is one (very strong) wireless connection.
I used the same SSID name, channel, and encrypted with WPA2-Personal synced 100% clock and all, except the mac address is different.
I have searched high and low for an answer and if anyone here can help me, I would be truly grateful.
Thank you in advance.
Ps- I can post screen shots if requested.
Last edited by grimreaper; 17 Jul 2010 at 16:04. Reason: Solved:)