Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Marvell Rolls Out New SATA 6Gbps Controller for SSDs

15 Mar 2012   #1
Brink
Microsoft MVP

64-bit Windows 10 build 10166
 
 
Marvell Rolls Out New SATA 6Gbps Controller for SSDs

Quote:
Marvell this week said it's ready to start shipping its new 88SS9187 SATA controller with on-chip RAID technology for NAND flash memory devices. The on-chip RAID solution is able to recognize and retire defective NAND, and is one of a handful of new "game changing" features baked into Marvell's third generation SATA 6Gbps controller, such as a "groundbreaking correction capability" courtesy of its high performance ECC engine.
Read more at:
http://www.maximumpc.com/article/new...ontroller_ssds


My System SpecsSystem Spec
.

15 Mar 2012   #2
ReviverSoft

Windows 7 HP / Ultimate x64
 
 

Hopefully this one doesn't turn out to be buggy and receive firmware updates that don't help.

A good no. of people have had trouble with Marvell's controllers.
My System SpecsSystem Spec
Reply

 Marvell Rolls Out New SATA 6Gbps Controller for SSDs




Thread Tools





Similar help and support threads
Thread Forum
marvell 91xx sata 6g controller. This device cannot start. (Code 10)
Hey there, I recently updated my BIOS to a newer version due to BSODs and now it's been running perfectly. Although my system works fine now without any problems, I'm not too sure as to what marvell 91xx sata 6g controller is and if it'll affect my system. This never appeared before the BIOS update...
Hardware & Devices
Marvell driver for controller not compatible with Win 7
My system is slow to load and no real problem with using the internet. It's just when I play BF3 online my system crashes hard sometimes and powers off or I get real slow fps/ freezes up and I have to shut down the pc to get out. Windows tells me the hd controllers driver (Marvell) is not...
Drivers
Onboard Marvell Controller Opinions
Like a lot of you, my motherboard has an extra set of SATA Controllers by Marvell. When I first tried them back on my Gigabyte Socket 1366 board I thought they were lousy in comparison to the Intel SATA Controller. The benchmarks were not even close. I was mainly concerned about my boot drive...
Hardware & Devices
How do I disable a Marvell Controller?
My computer starts up very fast, but it takes over 2 minutes to restart! I had 2 500 hard drives with a Raid array set up (I think). This caused endless waste of time because it had to keep repairing it'self ... so I disconned one of the hard drives. Now when I select to 'restart' my computer,...
General Discussion
Marvell 9128 Sata 3.0 [6Gb/s] manifesting as IDE
Good evening- I've been working these last few days on some recent upgrades to my GA-790FXTA-UD5 system, and I have found some puzzling issues. I did my original install of Win7-64 ultimate last year using the AHCI drivers from the beginning in order to get the extra speed at startup etc. ...
Hardware & Devices
Marvell Yukon Controller cant connect
Hi, I just loaded Windows 7 Build 7600 and cant connect to network or internet through my on-board Marvell Yukon gigabit controller. I've updated my drivers to the latest i can find (v. 11.22.4.3) and still nothing. Occasionally it will show I'm connected, but when I launch IE it drops connection....
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:53.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App