 |  |
| |
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows 7. The Windows 7 forum also covers news and updates and has an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.
Windows 7 - Need help building case.
| |
| 06-10-2011 | #1 |
| | Need help building case. I already have all the parts and every thingg. Mobo: AMD Phenom 2 x3 720 2.80Ghz OriginalCase: Altex Forge P720 case (not selling them anymore) New case: Antex 900 power supply included Im wondering if anybody knows how to hookup the shutdown and turn on power button for the Antec 900 case, im thinking about moving my Motherboard and hardrives to the Antec 900 case so I can have better cooling with my gaming games n stuff. Thanks. |
My System Specs |
| 06-10-2011 | #2 |
| | What you're referring to is called the Front Block Panel. There will be instructions on pin placement in your motherboard's manual. Your board may also have an adapter that you can use so you don't have to connect each wire individually... sometimes it can be a tight fit as you make those connections after the board has been installed and because the front block panel is placed at the bottom of the board... well, you'll see... use the adapter if you have one. |
| My System Specs |
| 06-10-2011 | #3 |
| | I dont have an adapter, but my motherboard did have little words that indicated what went where, and i already changed cases, it wasnt too hard, thanks for the help. |
| My System Specs |
| . |
| |
 |
| Thread Tools | |
| Similar Threads for: Need help building case. | ||||
| Thread | Forum | |||
| Need help with building a new pc | Hardware & Devices | |||
| Building a Pc Need Help | Hardware & Devices | |||
| Building a new PC | Hardware & Devices | |||
 The Case of the Missing Pillow Case | Chillout Room | |||
| Building a new PC | Hardware & Devices | |||
All times are GMT -5. The time now is 09:15 PM.
