 |  |
| |
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows 7. The Windows 7 forum also covers news and updates and has an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.
Windows 7 - Cabling?
| |
| 08-15-2011 | #1 |
| | Cabling? Hello geniuses! So I bought these cable ties, and I'm expecting to do some cabling (.. receive more space in the case itself), so I wanted to have some tips on the go. I the case, Cooler Master CM Scout, so I was wondering, if there'd be enough space to put a good portion of the cables, on the backside of the case. Scout - Cooler Master I also have a fan controller, so I was thinking about to take small pieces of tape up of the case, so the cables connected to the fan controller with the fans itself, won't hanging around issuing the space. Throw any tips up for this topic you'll like.  Best Regards, FredeGail |
My System Specs |
| 08-15-2011 | #2 |
| | Take a look at this video. |
| My System Specs |
| 08-15-2011 | #3 |
| | Thank you Dwarf, he didn't spoke a lot about cabling, but it was a nice watch indeed. Best Regards, FredeGail |
| My System Specs |
| . |
| |
| 08-17-2011 | #4 |
| | Hey fredegail, I think the scout has much potential for cable management! I have a cm 690 myself and I just tucked half of the cables away on the back of the mobo tray (ran them through the hole) and for the other half, I used one of the SATA drive bay slide things - whatever they're called - , put a piece of black plastic in it, slid it into place on the lowest bay and put the wires under there (isn't in the way of my front fan either). I don't know if you can see it properly, but I posted pictures here: Show Us Your Rig [2] Cheers |
| My System Specs |
| 08-18-2011 | #5 |
| | 
Quote: Originally Posted by Amplid  Hey fredegail, I think the scout has much potential for cable management! I have a cm 690 myself and I just tucked half of the cables away on the back of the mobo tray (ran them through the hole) and for the other half, I used one of the SATA drive bay slide things - whatever they're called - , put a piece of black plastic in it, slid it into place on the lowest bay and put the wires under there (isn't in the way of my front fan either). I don't know if you can see it properly, but I posted pictures here: Show Us Your Rig [2] Cheers |
| My System Specs |
| 08-18-2011 | #6 |
| | Post pics when ur done!  |
| My System Specs |
 |
| Thread Tools | |
| Similar Threads for: Cabling? | ||||
| Thread | Forum | |||
| Network cabling access for new office | Network & Sharing | |||
 Networking cabling | Network & Sharing | |||
All times are GMT -5. The time now is 09:18 PM.
