Windows 7: Post Your Overclock! [2]

That took me a minute to get lol......nope, just couldn't get there! Maybe next time.

Good job Kelly! Maybe move the rig from the heat or get some sort of deflector on it?

The rig isn't getting the full force of the vent as it spreads the heat out 180*, and I can't really move the PC from where it is now. The heat on does raise the temp about 2-3* though, but it doesn't run all the time. It's just enough to not be within margin of error, but nowhere near enough to bother me. I can lower the voltage and probably drop it a couple of degrees.....that's what I love about this setup, so much flexibility.

Actually, the vent does have a switch to adjust airflow, instead of deflection, I may be able to make a reduction! Thanks for getting the gears turnin....will see if it makes a difference. It doesn't need to be wide open anyway, I NEVER get cold in this part of the house.

Thought I'd give it a quick run to 4.5 to see how it's going to act. Need to lower the voltage, and play with the settings, will make more adjustments later.

Voltage looks pretty good already Dave.

How come the 4545? You got the BCLK at 101 or something?

Nice job, Dave. Good voltage and temps. Well done.

Ya, just checking out the new BIOS

That's just walking up the multi, at 4.4 had to give a little vcore bump. Still need to lower it and do some testing.
Haven't changed any other settings, besides setting the Ram to spec.

wow 5.ghz. i can get up to 4.9ghz on my 2600k / Asus p8p67 1.45V straight on 100 x49. not stable at 100% :X but can browse or play game for a while. reaching 65C max with corsair h100



Edit : got up to 5ghz. 1.52V. quite stable , ran Prime for 10mn but temp was getting way too high // 80C,

Here is the latest bump. Been running this for a few days now and it hasn't missed a lick!

Those temps are pretty low, did you check them with another program?
Like RealTemp.

If it's accurate, you should go to +5GHz.