Windows 7: Show Us Your Rig [4]

linnemeyerhere · 21 Jan 2013

In the end you're really just exchanging foot prints. If the computing area has the needed space then it makes sense if not then it's a space hog. I would like to see two or three custom monitor stands that are the computer rig.

Bungee18 · 22 Jan 2013

Hi Guys.
So here it is at last.
After many an hour of work I finished it.
No matter how much I tried, just coudn't make the backside look any better.

Also, the thing wouldn't boot when I added the second video card, so I'm running on one till I have more time to experiment.
Hope you like it.
Cheers,

J

essenbe · 22 Jan 2013

Well done Bungee. The cable extensions always make the backside, well hard. I have fought with them for many an hour. You did quite well with them. The inside is great. About as clean as you can make it. You have done a fantastic job.

Name: clap-animated-animation-clap-smiley-emoticon-000340-large.gif
Views: 92
Size: 105.0 KB

Bungee18 · 22 Jan 2013

Thank you very much Steve!
Now I have to experiment with OC'ing the new CPU with new mobo, which is proving quite challenging since the MSI BIOS is quite different from ASUS.
Also I need to find optimum settings for the H100i fans. I'm iddling at around the same temps than what I had with my aircooler, but load temps are ridicously low (no OC yet), yet it is not as quiet.
Thanks for you help and advice with this one Steve.
Cheers,

J

ganjiry · 22 Jan 2013

Very nice Bungee. You've done a real tidy job there mate. Nice 1

essenbe · 22 Jan 2013

Bungee, don't be concerned about idle temps, unless they are way too high. You buy a cooler for the stressed temps. That's where a cooler shows it's worth. You'll get used to the bios. We've all had to do it, and you'll find plenty of help here too.

Bungee18 · 22 Jan 2013

Thank you Ganjiry.
I really enjoyed myself while doing it.

@Steve,
Thanks. So far I've been unable to test it at full load (OC'ed) 'cause the board vdroops like crazy and can't run prime95 even for 5 seconds.
Will have to research on how to OC with this board. I have reached the board's VCore limit (1.449), but it drops to 1.39V when I start p95.

It looks like it is going to take a while before I can get any decent OC...
Thanks again,
J

BerntBalchen · 22 Jan 2013

Here is my rig. Clean, simple and powerfull.

kbrady1979 · 22 Jan 2013

Quote: Originally Posted by BerntBalchen

Here is my rig. Clean, simple and powerfull.

Wow........what a Beast! Nice rig.

essenbe · 22 Jan 2013

BerntBalchen, great rig. Extremely nice job, Well done.

@Bungee, my advice is always make sure it is stable at stock. Run Prime at stock first. If you're not stable at stock, you'll never be able to get a stable overclock.

Windows 7: Show Us Your Rig [4]

Show Us Your Rig [4] problems?