Windows 7 Forums


Windows 7: Overclocking FX 8120 - Can't get past 4.3K

28 Dec 2012   #11

Windows 7 Ultimate x64 Service Pack 1
Doncaster, UK
 
 

It could well be that you have reached your CPUs own limit, and that is that. Not all CPUs can be overclocked as much as others, even units that originate on the same wafer can overclock differently.

My System SpecsSystem Spec

28 Dec 2012   #12

Windows 7 Ultimate x86
Merthyr Tydfil, Wales
 
 

Yes well said dwarf. When amd reached the world record they tried 12 chips sraight from amd from the same batch and the others didnt get even close to the good one
My System SpecsSystem Spec
28 Dec 2012   #13

Windows 7 Home Premium 64bit sp1
Laguna Hills Southern California
 
 

Quote   Quote: Originally Posted by Bungee18 View Post
Did FSB. Didn't work. Prime95 blend failed within the minute
Multiplier 21.5X, FSB 205.
Upped voltage to 1.425V, memory set to default values. Anything else I should be doing?
Thanks for your help.
anything past or leading to 4.4ghz needs to be 1.44 to 1.45 your voltage is too low that is why you are failing prime voltage needs to be up to atleast that much
My System SpecsSystem Spec
.


28 Dec 2012   #14

Windows 7 Ultimate x86
Merthyr Tydfil, Wales
 
 

Take that advice. He has overclocked that very chip and has succeded to hit 4.5 using 20.5*220 and 1.49 if im correct.
My System SpecsSystem Spec
28 Dec 2012   #15

Windows 7 Home Premium 64bit sp1
Laguna Hills Southern California
 
 

Quote   Quote: Originally Posted by pedroc1999 View Post
Take that advice. He has overclocked that very chip and has succeded to hit 4.5 using 20.5*220 and 1.49 if im correct.
1.449 to be exact
My System SpecsSystem Spec
28 Dec 2012   #16

Windows 7 Ultimate x86
Merthyr Tydfil, Wales
 
 

Thanks for correcting me
My System SpecsSystem Spec
31 Dec 2012   #17

Windows 7 Ultimate x64 SP1
Buenos Aires, Argentina
 
 

Quote   Quote: Originally Posted by Solarstarshines View Post
Quote   Quote: Originally Posted by Bungee18 View Post
Did FSB. Didn't work. Prime95 blend failed within the minute
Multiplier 21.5X, FSB 205.
Upped voltage to 1.425V, memory set to default values. Anything else I should be doing?
Thanks for your help.
anything past or leading to 4.4ghz needs to be 1.44 to 1.45 your voltage is too low that is why you are failing prime voltage needs to be up to atleast that much
Thank you Solarstashines and Dwarf. For some reason I wasn't getting notifications for this thread.
Solar, later I will try upping the voltage to the values you suggest. Will update when I'm done testing stability.
Right now I'm very tired from moving to a new case.
Tanks again,
J
My System SpecsSystem Spec
01 Jan 2013   #18

Windows 7 Ultimate x64 SP1
Buenos Aires, Argentina
 
 

Quote   Quote: Originally Posted by Solarstarshines View Post
Quote   Quote: Originally Posted by Bungee18 View Post
Did FSB. Didn't work. Prime95 blend failed within the minute
Multiplier 21.5X, FSB 205.
Upped voltage to 1.425V, memory set to default values. Anything else I should be doing?
Thanks for your help.
anything past or leading to 4.4ghz needs to be 1.44 to 1.45 your voltage is too low that is why you are failing prime voltage needs to be up to atleast that much
Solarstashines,
Achieved 4.525K stable following your advice, but the thing got too damn hot, it touched 59 C after like an hour of p95 and it idles at around 38-39C vs 34C at 4300K. I need better CPU cooling for using this OC 24/7.
I'll stick to 4300K for everyday use till I get a better air cooler or go liquid.
Thanks for your help.
J
Attached Thumbnails
Overclocking FX 8120 - Can't get past 4.3K-capture.jpg   Overclocking FX 8120 - Can't get past 4.3K-capture2.jpg  
My System SpecsSystem Spec
01 Jan 2013   #19

Windows 7 Ultimate x86
Merthyr Tydfil, Wales
 
 

Were all glad to know that you achieved it! Solar had lots of success with that chip and i was sure that others would too.
My System SpecsSystem Spec
01 Jan 2013   #20

Windows 7 Ultimate x64 SP1
Buenos Aires, Argentina
 
 

Quote   Quote: Originally Posted by pedroc1999 View Post
Were all glad to know that you achieved it! Solar had lots of success with that chip and i was sure that others would too. May i suggest a coolermaster hyper 212 + or evo?
The one I have is way better than the hyper 212+ or evo, although it is cheaper.
Thanks for your help Pedro.
My System SpecsSystem Spec
Reply

 Overclocking FX 8120 - Can't get past 4.3K problems?



Thread Tools



Similar help and support threads for: Overclocking FX 8120 - Can't get past 4.3K
Thread Forum
BSOD and app crashes with AMD FX-8120 BSOD Help and Support
Can't get past welcome screen BSOD Help and Support
BSOD after overclocking my I7 960 can't get past 3.4Ghz BSOD Help and Support
Solved 2 BSOD in the past 24 hrs BSOD Help and Support
How To: Overclocking Your AMD Processor : Introduction: The Basics Of Overclocking Performance & Maintenance


All times are GMT -5. The time now is 06:53 PM.


Seven Forums Android App Seven Forums IOS App Follow us on Facebook

Windows 7 Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32