Windows 7 - Overclock And DRAM Frequency

I heard that notebooks shouldn't be oc-ed,yet I had to experiment.I got the 1.6G up to 1.9G.Everything ran smooth.Temps remained the same.Prime95 ran torture test for 4 hours and no problems.Performance was increased and stable. My only concern is that the DRAM frequency went over the specified max(333mhz) to like 360mhz.I have since refrained from oc-ing for reasons of possibly damaging the DDR2.Are my concerns over this legitamate?I also ran m mem diagnostics_pagefile-off,extended.No issues. I'm getting my temps and speeds from CPUID products.I think they are pretty accurate. Thanks for any insight.

Did I post in the wrong forum?

Dunnot think so....! Maybe some screenshots and programs used will help more?

Yes, they are legitimate concerns. However, it does depend upon the type of ram you are using. Some ram can take running out of spec better than other types. Since this: and you are comfortable in doing it to your notebook, then you should go into your bios and check the ram timings and set the frequency back one step (from 333MHz to 266MHz -- if you can even do it with your laptop) That way, when you increase the clock speed, the ram will increase too, but not over the 333MHz which is the spec for your DDR2-667 ram)

If I understand correctly,I can't change BIOS on this notebook.It's why I used SETFSB.I've tried AMD Overdrive but most controls were greyed out.BIOS again is my guess.By the way,thanks for response.

Yeah, I didn't think you'd have much chance in changing the BIOS.

AMD Overdrive is supposed to be for the 7-Series chipset from AMD, so it wouldn't surprise me that most of the features are grayed out.

I've never heard of SETFSB, but if it has an option to set the ram frequency, then set it one step back from 333MHz, or to 266MHz)

Hi,again mpcrsc562.There are no control settings.I think only Front side bus.Thanks again for response.SetFSB_HomePage

Man...............I'm gonna have to get a desktop to play with.Too many restrictions on Laptop.This is going to turn out to be an exspensive hooby.Could spend money and time on worse things............

It's not the restrictions of a laptop, per se, it is that you have a store bought pc mass produced by a major pc manufacturer. If you had an Acer, HP, Dell, etc, desktop, you'd probably still be hampered in what you could do to it (by way of bios, overclocking, etc) without the use of some 3rd party software (as you have used with the SETFSB)

Thanks again for your timely and applicable response,mpcrsc562.