Windows 7: Cooling with Haf 922 case and H50 water cooler

Hi i am cooling with Haf 922 case and H50 water cooler. I would like to know what people are recomending for their fan setup..I have a push pull setup with my H50. Front intake fan and top exhaust fan. 2 side intakes and 1 bottom intake fan..my cpu underload gets to about 51. Please someone help with my setup
Thanks

Top/front - intake
rear- exhaust

Hi,

It's a difficult one regarding the H50, Corsair recomments to use the fans on the H50 as intake, but you will be blowing hot air and without a dust filter dust over your motherboard.
I used to use the H50 in P/P and followed their advice because I had a dust filter on it and 3 exhaust fans right above it.
What i've read from other users the difference in using the fans on the H50 as exhaust or intake will only be a couple of degrees.
Anyway I don't think you have bad temps with H50 and a 940 under load.

MK2

My experience with a HAF 932 and push / pull with the H50 is having it mounted in the rear exhausting air. I get better temps that way than any other way I have had it mounted in the case.