Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Post Your Overclock! [2]


01 Feb 2013   #391
Solarstarshines

Windows 7 Home Premium 64bit sp1
 
 

Impressive if it works for you i would leave it but also 1.48 seems kinda high but if it is solid leave it

and enjoy the fruits of your labor


My System SpecsSystem Spec
.

01 Feb 2013   #392
ganjiry

Win7 Home Premium x64 SP1
 
 

Nice1 Bungee, You're a braver man than me, Fairplay though you got a nice oc

llc has come in right handy although my board defaults llc to it's highest level so had to change that. I've not tried to oc my cpu without any llc but i reckon it would take a lot more patients than i have
My System SpecsSystem Spec
02 Feb 2013   #393
essenbe
Microsoft MVP

Windows 7 Ultimate SP1 X64 (Windows 10, 8.1, Linux Mint, Windows XP and others in VM)
 
 

Quote   Quote: Originally Posted by Britton30 View Post
What a smart man (essenbe) told me is that he uses the ASUS AI suite to set some overclocks until he gets BSOD, then goes into BIOS and sets it to just below what caused it.
Gary, all I use it for is to adjust voltage in AI Suite. I set it up in bios, but when stress testing I use AI to adjust voltages. When I find the right one, I go to bios and change it there. AI allows you to change it in windows, but does not change bios. You have to do that. I never use it for anything else other than monitoring.
My System SpecsSystem Spec
.


02 Feb 2013   #394
ganjiry

Win7 Home Premium x64 SP1
 
 

Quote   Quote: Originally Posted by essenbe View Post
I never use it for anything else other than monitoring.
Do you get many false readings with AI suite? When i had Ai suite II installed i found it gave quite a few false readings for fan speeds and northbridge voltages among other things.
Is it the newer version III for your board?
It could be a really good monitoring software once all the little bugs are sorted enit.
My System SpecsSystem Spec
02 Feb 2013   #395
Bungee18

Windows 7 Ultimate x64 SP1
 
 

Dropping to 4.4 for 24/7 use. 4.5 and beyond idles at too high a vcore (1.48 or more).
Cinebench only drops from around 7.85 to 7.44. I can live with that...
I can see a Sabertooth in my near future!
Thanks for your comments and advice guys.
Cheers,
J
My System SpecsSystem Spec
02 Feb 2013   #396
Solarstarshines

Windows 7 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by ganjiry View Post
Quote   Quote: Originally Posted by essenbe View Post
I never use it for anything else other than monitoring.
Do you get many false readings with AI suite? When i had Ai suite II installed i found it gave quite a few false readings for fan speeds and northbridge voltages among other things.
Is it the newer version III for your board?
It could be a really good monitoring software once all the little bugs are sorted enit.

To me it is dead on i use HW monitor and readings in the Bios to compare so far so good they been dead on
My System SpecsSystem Spec
02 Feb 2013   #397
ganjiry

Win7 Home Premium x64 SP1
 
 

Nice 1, They must have worked some of the bugs out enit.
I may give it a try again as i liked the probe part of it aswell as the fan control.
My System SpecsSystem Spec
02 Feb 2013   #398
Solarstarshines

Windows 7 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by Bungee18 View Post
Dropping to 4.4 for 24/7 use. 4.5 and beyond idles at too high a vcore (1.48 or more).
Cinebench only drops from around 7.85 to 7.44. I can live with that...
I can see a Sabertooth in my near future!
Thanks for your comments and advice guys.
Cheers,
J
your cinebench would be higher if you use the FSB @4.7 im hitting 8.10
My System SpecsSystem Spec
02 Feb 2013   #399
ganjiry

Win7 Home Premium x64 SP1
 
 

Progress update.
I don't usually have much patience when it comes to overclocking but its stopping me thinking about hospital by keeping my mind busy
I've been testing different voltage's @ 4.4Ghz but got a stable 4.4Ghz, 200x 22, @1.428v, Drops to 1.416 @ load.
cpu/nb 2400 @ 1.237v
HT Link 2000 auto v
cpu and cpu/nb llc set to high.
Memory still stock xmp.
Everything seemed stable untill it bsod while playing War Thunder.
So i upped the cpu/ nb to 1.25v which improved stability aswell as increasing score's in everything i've tried so far.
10 Passes IBT in 428.00, Max temp was 47c but settled @ 45c.


Attached Thumbnails
-hwinfo.png   -cinebench-cpu-4.4.png   -cinebench-open-gl-4.4.png  
Attached Images
  
My System SpecsSystem Spec
02 Feb 2013   #400
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Good job tommy and Ryan. you're going to make those AMDs squeal and say "Bob's your uncle".
My System SpecsSystem Spec
Reply

 Post Your Overclock! [2]




Thread Tools



Similar help and support threads for2: Post Your Overclock! [2]
Thread Forum
Need help to overclock! PC Custom Builds and Overclocking
Solved Overclock a GTX 660 PC Custom Builds and Overclocking
GTS 450 overclock PC Custom Builds and Overclocking
Post Your Overclock! PC Custom Builds and Overclocking
Do you think i should overclock my RAM and CPU? PC Custom Builds and Overclocking
i7-930 Overclock help PC Custom Builds and Overclocking

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:15 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App