Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Hey Fans

06 Aug 2010   #1
YTBOY83

Windows 7 64Bit Ultimate Edition SP1
 
 
Hey Fans

I have got a pc tower which only has a fan up at the top and at the back????????? The psu is up near the top as well.

My mates used to have the back set as intake and the top as exhaust and got better temps, i tried it and the temps are in the 38% and hwen i ran a couple of programs i ened up at 40 0dd.

When i changed the back to exhaust it went from 38 to 40. What a paint.

Is the any solotion to this man.

How to you go about abdding extra fans with diy,?????


My System SpecsSystem Spec
.

06 Aug 2010   #2
profdlp

Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2
 
 

I have a hole saw you attach to a drill which makes perfect 80mm holes. I'll probably get another one for 120mm. Just be very sure where you put them and practice on some scrap sheet metal before you try it on the case!


Attached Images
 
My System SpecsSystem Spec
16 Aug 2010   #3
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

hi,
i had this problem my hard drive was running on critical temps (54c) so i fitted a hard drive cooler, a blower fan (that sits in a available pci slot) and a intake fan (3 little fans that sit in the drive bay at the front bezel) and now my temps are always below 40c which is a large drop in temp. the noise is not that bad but i would rather have a bit of fan noise than a overheated inside case that will shorten the life of the components


Attached Images
   
My System SpecsSystem Spec
.


16 Aug 2010   #4
RBIEZE

Win 7 pro 64, Soloris, Xp pro 32
 
 

Electric Jigsaw, masking tape, marker, and steady hands.
Go slow , use a fine tooth metal blade with at least 24 TPI and be patient.

Practice a couple of times on an old Pc case or similar thickness scrap sheet metal.

I would suggest that you go with 120mm fans, as they have the widest selection of noise/versus airflow.


OHH yes, absolutely, positively remove all components from your case before cutting the fanhole.

Electronics do not like metal chips on them , they tend to go all sparky and poofy.
then the magic smoke comes out and you'll never get that back in again, believe me , Ive tried....
My System SpecsSystem Spec
16 Aug 2010   #5
archie123

Win 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by rmw020 View Post
I have got a pc tower which only has a fan up at the top and at the back????????? The psu is up near the top as well.

My mates used to have the back set as intake and the top as exhaust and got better temps, i tried it and the temps are in the 38% and hwen i ran a couple of programs i ened up at 40 0dd.

When i changed the back to exhaust it went from 38 to 40. What a paint.

Is the any solotion to this man.

How to you go about abdding extra fans with diy,?????
what temperatures are you talking about? cpu , gpu , case temp?? those temps aint hot
My System SpecsSystem Spec
16 Aug 2010   #6
Phone Man

Windows 8.1 Pro w/Media Center 64bit, Windows 7 HP 64bit
 
 

What is the make and model of your case? Then we can see what can be done. It may have places to mount additional fans already.

Jim
My System SpecsSystem Spec
19 Aug 2010   #7
YTBOY83

Windows 7 64Bit Ultimate Edition SP1
 
 

It is ok now. I have went for a new build.

Thank you.
My System SpecsSystem Spec
Reply

 Hey Fans




Thread Tools





Similar help and support threads
Thread Forum
fans on NB
what up guys? so the only component in my rig tht gets hot is the NB. and that's because my massive GPU is blocking any moving air to it. so how do u attach a fan to the NB? do u guys have pics? I have a nice fan to use, but yea still.
PC Custom Builds and Overclocking
New Fans.
Hello, I just bought some Yate Loon fans, and it appears that there are no screws. And it also seems like, there's no screws following in my motherboard case. Do I really have to buy them myself?
Hardware & Devices
Fans
hello sevenforums, was looking at getting this product Hotway 4-Bay non-RAID USB3.0/eSATA Enclosure 4-BAY ENCLOSURE anyway i was just having a look at replacement fans if i decided to change it but the measurements are 80 x 80 x 20 mm and most the 80 mm fans are 80 x 80 x 25 mm :S does...
PC Custom Builds and Overclocking
Help with my fans set up.
Hi folks, i need some advice on which way the fans should be within my new case. XIGMATEK Midgard PC Tower Case at cheap prices | PC World
Hardware & Devices
help with fans
ok so i need input i have 4 fan connecters on my mother board CPU Fan - 4 pin Pwr Fan - 3 pin Sys Fan 1 - 3 pin - Un-used Sys Fan 2 - 4 pin its a gigabyte MB that comes with easytune which lets me keep CPU fan at 100% ok so this is the deal
PC Custom Builds and Overclocking
Help with fans.
Have alook at the case pictures, can you please tell me which way i should have all the fans.??????????? A 120mm can be installed a front, 2 x 120 mm on the side and 140mm maximum on top of case. The case is NZXT Beta Evo Black Metal Edition (BEVO-001BK)
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App