Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Loading Monitor to Black/Blank

07 Aug 2010   #1
fluxear

Windows 7
 
 
Loading Monitor to Black/Blank

Okay I know this is stupid and I have read similar topics but was wondering if by chance mine could be resolved. Basically all I did was Overclock BIOS but now I can not see on the monitor. I know your general first answer is "F8" for safe mode but that does not work also mainly because I can not see where it is in the loading process. So if this can be resolved great! My whole goal to begin with was to get the 4gb ram to be recognized but made one slip up and now I am here.


My System SpecsSystem Spec
.

07 Aug 2010   #2
Mellon Head

Win 7 Pro x64/Win 10 Pro x64 dual boot
 
 

Please tell me you didn't try to overclock the laptop in your system specs...

First of all, you should reset your BIOS. Normally, there is a three pin reset jumper on the motherboard (assuming that this isn't the lappy) that you need to move from its' current position to the reset position for a few minutes, then move it back. You board's manual will have the location for it pictured somewhere.

If that doesn't work, you will need to remove the CMOS backup battery (the little coin cell) for about a half hour, and then put it back in and try to boot up.

If you can get it to boot again, with a screen, set the BIOS to defaults, save, and then reboot.

Please post back with the results, and maybe some more information on what it was you tried to do. Maybe we can help.
My System SpecsSystem Spec
07 Aug 2010   #3
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

As Mellon Head said...

If you have a laptop, you will need to remove part of the bottom casing to remove the battery to reset your BIOS.

~Lordbob
My System SpecsSystem Spec
.


08 Aug 2010   #4
fluxear

Windows 7
 
 

no it was for my tower
My System SpecsSystem Spec
Reply

 Loading Monitor to Black/Blank




Thread Tools





Similar help and support threads
Thread Forum
Monitor Goes Black in Dual Monitor Configuration
I have been running a dual monitor setup for several years without issue. I was using a 28" Hanns G 16:10 1920x1200 via HDMI & an ASUS 27" via DVI. They were connected to a Zotac GTX 570 and then later to a Gigabyte GTX 770 4GB graphics card. About a month ago I substituted a 30 Inch Monoprice...
Hardware & Devices
Dual monitor problem - 2nd monitor is blank
I have dual monitors set up for extended displays. The monitors are correctly positioned in the virtual display. When I move a window to the second monitor, it disappears from monitor 1 but doesn't show up in monitor 2 - that screen is black. Thanks
Graphic Cards
Browser goes blank about loading website
Hello, I am new to this forum. I am currently facing some problems in loading webpages from browsers. I have tried every browers with me like Firefox, IE and Chrome. But every time i enters an url, it loads the url( as i can see the title bar showing the website title) but the browser shows the...
Browsers & Mail
Blank screen after loading files , urgent help
Hello i have a dell optiplex 780 desktop computer with 160GB hard drive and 4GB ram and its a 64-bit OS , I had a windows 7 installed on it but once my couzin used it and he put on a password on thw windows and then he obviously forgot the password but anyway i couldn't get in to my user so i...
Installation & Setup
Monitor goes blank
My windows 7 has been a complete nightmare. Upgrade from Vista, didn't work since it got stuck and the rollback to vista was corrupted. I lost all my data, but that's not why I am here. After cursing at Microsoft I did a complete fresh install of windows 7. It seemed to work except for this...
Installation & Setup
one of my monitor goes blank
I installed win 7 enterprise 32bit over the weekend. so far everything is good except that when i lock my workstation i only see clt-alt-delete option on only one monitor other one goes blank (turn black) thoughts?? thanks yasir
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App