I did it! I set the multiplier and voltage to what I said before, set the ram to 667mhz, and set the NB Voltage to +60mv. I also set the Northbridge to 2000MHz, I think I kept forgetting to change it (It was set at 8x before, Lol)
It works and I get a temperature of 29C at no load, I'm gonna test with Prime95 soon.
Thanks Guys!
Last edited by Evilhugbear; 19 Sep 2010 at 19:59.
I turn on my PC this morning, and it decides not to post or do anything...
I had to reset the CMOS to get it to post
It was working fine yesterday, the temperatures were okay and everything.
Any ideas as to why it suddenly won't work?...
From what Ive read and heard a lot of people have been complaining about OCZ RAM so idk if thats your problem but it sounds like a good possibility. Now as for Overdrive not a good idea to try overclocking in that manor in my opinion always stick with the bios. Make sure your RAM voltages are at 2.1 too.
Quote
