Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: HAF 922 , question

17 Oct 2010   #11

W7 Ulti/64, XP Pro/32

The vid cards take air from inside the case and exhaust it out thru the vents by the monitor outputs.

The thing that works best is what keeps the box the coolest. Unobstucted airflow is the key. Having the large fan on case side, interfered with video card cooling. Airflow from one fan can and does interfere with airflow from other fans.
I have altered the case side fans airflow on two separate case designs. Both times resulted in lower vid card temps. The HAF 932 with its bottom tray cpu cutout offered a bonus. Putting a case fan on bottom tray side added further cooling to cpu. +/-10C

I also added little card board vents to channel airflow to specific components, specifically the cpu fans.

A little common sense goes along way.

My System SpecsSystem Spec
17 Oct 2010   #12

Windows 10 Pro

Quote   Quote: Originally Posted by Catswold View Post
Probably the only thing that would improve it would be the new cases with the boards mounted vertically. That would allow the heat from the GPU to flow directly up and out without impinging on the CPU cooler.
That would be a nice move
My System SpecsSystem Spec
16 Nov 2010   #13

Windows 7 Ultimate x64

So, if i don't OC ... is not worth to remove the HDD cage ?
My System SpecsSystem Spec

16 Nov 2010   #14

W7 Ulti/64, XP Pro/32

Dude, if you like to be industrious, have at it. You learn nothing from nothing. WTF you got too lose. Make a plan, and execute it.

SSD's are known to get warm. I have 4 in the lower trays, case front fan right there on them.

They do have HDD coolers that you put the drive in and then install into the cd-rom bays. Fairly cheap.

Your not OC'ing so you just need to maintain good airflow watch the ambient temp of the room, your puter is in. My apt has steam heat, its warmer in winter than summer sometimes. Keep dust build up at a minimum from cpu heat sink and case fans.
I OC'ed my system to hell, cpu, ram and vid cards. All stock cooling in place. Stock INTEL cpu heat sink, no ram cooler, vid card fans at 90%. System idles in 40'sC and peaks below 70C. So you really do not have to do anything, but, nothing ventured, nothing gained.

My System SpecsSystem Spec
16 Nov 2010   #15

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64

The world is your cooling oyster. Do what you want but in the end it will either improve cooling, remain unchanged or make it worse. Most air flow improvements will net small temperature changes. My opinion is to use quality fans that push a lot of air quietly and then have a systematic case cleaning maintenance plan in place. Overall I like the mod you selected as it uses Noctura fan of which I'm one. lol
My System SpecsSystem Spec
17 Nov 2010   #16

Windows 7 Ultimate x64

I wanna try it
But the only problem is, how to fix the HDD's in the cage, above the HDD cage.
My System SpecsSystem Spec
17 Nov 2010   #17

W7 Ulti/64, XP Pro/32

The slide out trays are for the HD's.
The bays at top are cd-rom bays.
What is there to cut. The slide tray bays are covered by the front side case fan. The top bays have knock outs in them that just twist out.
Put the cpu and its sink on mobo before install into case.
What are you talking about cutting for?
I Googled the 922, FYI.
My System SpecsSystem Spec
17 Nov 2010   #18

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64

As mentioned earlier I would add a second fan to the stock HDD tray on the inside so you have two fans in classic push pull. In the end you want air flow over the hard drives as well !
My System SpecsSystem Spec

 HAF 922 , question

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Question about SSD's
I saw these comments on a site about SSD's , is the below comments true ? I was hoping to use the SSD as my primary drive , i don't store much . Thank you
Hardware & Devices
Thermal Paste Question..(Noobish Question)
Hey guys, I recently purchased Corsair H40 that came with pre applied thermal paste. Before I placed the H40 sink on my processor, I applied a thin layer on the on the processor with Cooler Master thermal paste. So essentially I mixed the H40 pre applied thermal paste with the Cooler Master thermal...
PC Custom Builds and Overclocking
WEI Question
Hey guys, I went into my system properties to get into something today, but when i did it prompted that i needed to re-rn the assesment. I did so and my graphics score went from a 7.4 down to a 6.9. Would this be caused from me running display fusion on my system to allow me to do certain...
Performance & Maintenance
RAM Question
I will probably be getting this motherboard Gigabyte GA-Z68A-D3H-B3 rev. 1.0 Socket 1155 ATX Motherboard Intel Z68 Express Intel Core i7 i5 i3 LGA1155 Processors, Dual DDR3 2133 SATA III SATA 6.0 Gb/s Gigabit LAN SLI CrossFireX USB3.0 HDMI DVI 7.1 Channels Audio-Best Computer Online Store Hous I...
Hardware & Devices
Answer Question, Ask Question.
First (hope you get the reference): In a world where a piano is a weapon, not a musical instrument, on what does Scott Joplin play "The Maple Leaf Rag"?
Chillout Room
Logitech 5.1 surround question and soundcard question IDT and Realtek
So my situation is unique lol i have a Dell inspiron n5010 laptop running Windows 7 ultimate 64 bit the soundcard for this is either IDT 92HD79B1, v., A01 or A03 i dont know what the default one mine came with is. Documentation i hope that helps ^ and the attatchment i...
Sound & Audio

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:25.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App