AMD Phenom IIx6 1055t oc??

Page 1 of 2 12 LastLast

  1. Posts : 138
    Windows 7 Ultimate x64
       #1

    AMD Phenom IIx6 1055t oc??


    I heard it has a locked multiplier...is it possible to over clock this processor exactly what is a locked multiplier
      My Computer


  2. Posts : 6,885
    Windows 7 Ultimate x64, Mint 9
       #2

    I don't think it is locked (but you should be able to check).

    Locked multiplier means you cannot increase the clock to speed up the CPU.

    ~Lordbob
      My Computer


  3. Posts : 138
    Windows 7 Ultimate x64
    Thread Starter
       #3

    The AMD Phenom II X6 1055T is a 2.8GHz processor with a locked multiplier. This is one of the primary differences between the AMD Phenom II X6 1055T and the AMD Phenom II X6 1090T which is a Black Edition processor with an unlocked multiplier. Another is the out of the box speeds. The AMD Phenom II X6 1090T comes from the factory clocked at 3.2GHz with a Turbo clock of 3.6GHz, while our AMD Phenom II X6 1055T comes at 2.8GHz with a 3.3GHz Turbo clock.

    This is from legitreview is it wrong?
      My Computer


  4. Posts : 6,885
    Windows 7 Ultimate x64, Mint 9
       #4

    Genesis4455 said:
    The AMD Phenom II X6 1055T is a 2.8GHz processor with a locked multiplier. This is one of the primary differences between the AMD Phenom II X6 1055T and the AMD Phenom II X6 1090T which is a Black Edition processor with an unlocked multiplier. Another is the out of the box speeds. The AMD Phenom II X6 1090T comes from the factory clocked at 3.2GHz with a Turbo clock of 3.6GHz, while our AMD Phenom II X6 1055T comes at 2.8GHz with a 3.3GHz Turbo clock.

    This is from legitreview is it wrong?
    It might be locked. I could not find much information about it.

    ~Lordbob
      My Computer


  5. Posts : 1,117
    Windows 7 Ultimate x64
       #5

    To answer your question about being able to overclock the processor, yes, you can. But, if your motherboard supports it.

    The difference between locked and unlocked multipliers is that with unlocked multiplier, you go into BIOS, go to the correct setting, and change the multiplier--from x14 as this is a 2.8GHz chip (200MHz times 14 = 2.8GHz--200MHz being the base clock frequency) to anything you want it to up or down. AMD lists their processors with unlocked mulitpliers as "Black Edition." These make for very easy overclockers as you are taking the next whole or half number multiplier to run the chip faster than its default clock speed (Example: 2.8 = stock with 14 times multiplier. 14.5 times multiplier = 2.9 GHz; 15 times multiplier = 3.0 GHz; 15.5 = 3.1GHz; 16 = 3.2 GHz; etc...)

    The locked multipliers are set and can't be changed. To overclock those, you must change the combination of: the base clock frequency, your RAM timings, and the HyperTransport speed, and voltages for cpu/ram/northbridge/southbridge (depending upon the level of overclock you are looking for). It is a much more time consuming endeavor overclocking this way than by simply changing the multiplier.

    Also, it is a risky endeavor either way. You shouldn't casually jump into overclocking your processor unless you read up first on what you're doing and the hazards associated, and unless you have the money to purchase new components in the event of a catastrophic failure (it can happen)

    (I would think that going the route of AMD's Overdrive utility would lessen the risk of overclocking if that is what you're really trying to do)
    Last edited by mpcrsc562; 23 Nov 2010 at 14:38. Reason: added info
      My Computer


  6. Posts : 205
    Windows 8 Professional
       #6

    I play some very grafic intensive games, I video edit, and I do a ton of photoshop work. Since Core2Duo was released I have not felt the need to overclock. With my new AMD Phenom II x6 I cant imagine anyone would need to overclock. If you are doing it just to be extra-nerdy (we've all been there brother) then have fun but be careful. Would be shameful to destroy the AMD Phenom.
      My Computer


  7. Posts : 138
    Windows 7 Ultimate x64
    Thread Starter
       #7

    Lol, I kinda am trying to be nerdy but I want to just over clock it to like 3.0 or 3.2 so it turbos at like 3.5 or so Shouldnt be much of a problem should It?
      My Computer


  8. Posts : 6,885
    Windows 7 Ultimate x64, Mint 9
       #8

    While the clock multiplier might be locked, you can crank the FSB up a bit.

    ~Lordbob
      My Computer


  9. Posts : 75
    Windows 7 ultimate x64
       #9

    Lordbob75 said:
    While the clock multiplier might be locked, you can crank the FSB up a bit.

    ~Lordbob
    This. People have done it and got to 4.0 ghz
      My Computer


  10. Posts : 138
    Windows 7 Ultimate x64
    Thread Starter
       #10

    also should I take the thermal paste off the heatsink to put on arctic silver 5 or should i just keep the stock paste?
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:54.
Find Us