Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Fans

17 Dec 2010   #1
s31

Windows 7 Ultimate
 
 
Fans

hello sevenforums,

was looking at getting this product Hotway 4-Bay non-RAID USB3.0/eSATA Enclosure

4-BAY ENCLOSURE

anyway i was just having a look at replacement fans if i decided to change it but the measurements are 80 x 80 x 20 mm and most the 80 mm fans are 80 x 80 x 25 mm :S

does anyone know if a 80 x 80 x 15 or 25 mm fan fit?

thanks


My System SpecsSystem Spec
.
17 Dec 2010   #2
Everlong

 

There's a few 80x80x20 fans I've seen around on websites. I can imagine an 80x80x15 fan would fit looking at the diagram, but 25 might be a bit too thick as the fan seems to have its own compartment on the chassis.
My System SpecsSystem Spec
17 Dec 2010   #3
s31

Windows 7 Ultimate
 
 

thanks everlong, do you know of any models that are 80 x 80 x 20mm?
My System SpecsSystem Spec
.

17 Dec 2010   #4
SledgeDG

Windows 7 Ultimate x86
 
 

My System SpecsSystem Spec
17 Dec 2010   #5
s31

Windows 7 Ultimate
 
 

thanks sledgeDG
My System SpecsSystem Spec
17 Dec 2010   #6
SledgeDG

Windows 7 Ultimate x86
 
 

you're welcome
My System SpecsSystem Spec
Reply

 Fans




Thread Tools




Similar help and support threads
Thread Forum
fans on NB
what up guys? so the only component in my rig tht gets hot is the NB. and that's because my massive GPU is blocking any moving air to it. so how do u attach a fan to the NB? do u guys have pics? I have a nice fan to use, but yea still.
PC Custom Builds and Overclocking
New Fans.
Hello, I just bought some Yate Loon fans, and it appears that there are no screws. And it also seems like, there's no screws following in my motherboard case. Do I really have to buy them myself?
Hardware & Devices
Help with my fans set up.
Hi folks, i need some advice on which way the fans should be within my new case. XIGMATEK Midgard PC Tower Case at cheap prices | PC World
Hardware & Devices
Hey Fans
I have got a pc tower which only has a fan up at the top and at the back????????? The psu is up near the top as well. My mates used to have the back set as intake and the top as exhaust and got better temps, i tried it and the temps are in the 38% and hwen i ran a couple of programs i ened up...
PC Custom Builds and Overclocking
help with fans
ok so i need input i have 4 fan connecters on my mother board CPU Fan - 4 pin Pwr Fan - 3 pin Sys Fan 1 - 3 pin - Un-used Sys Fan 2 - 4 pin its a gigabyte MB that comes with easytune which lets me keep CPU fan at 100% ok so this is the deal
PC Custom Builds and Overclocking
Help with fans.
Have alook at the case pictures, can you please tell me which way i should have all the fans.??????????? A 120mm can be installed a front, 2 x 120 mm on the side and 140mm maximum on top of case. The case is NZXT Beta Evo Black Metal Edition (BEVO-001BK)
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:17.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App