Rig Build

Page 5 of 8 FirstFirst ... 34567 ... LastLast

  1. Posts : 22,814
    W 7 64-bit Ultimate
       #41

    WartHog said:
    On theCPU cooler, which way does the fan go?


    Out!
      My Computer


  2. Posts : 1,586
    Windows 7 Ultimate x64 SP1
    Thread Starter
       #42

    LOL. Okay, but does it draw air across the fins or away from them?
      My Computer


  3. Posts : 4,517
    Windows 7 Home Premium 64bit
       #43

    WartHog said:
    On theCPU cooler, which direction does the fan go?

    What kind of cooler is it?

    Normaly, most have them set up pulling air from the front of the case.. blowing through the CPU heatsink & exahusting out the back of the HS, towards the case exhust fan.

    You may want to mount it differently depending how your case is set up.

    But the general idea will be to pull cool air across the HS, and exhaust towards a case exhaust.


    If this is a stock clooer, I believe most of those pull air from the case, blowing it down into the HS. But .. theres only 1 way to mount these if I remember correctly.
      My Computer


  4. Posts : 1,586
    Windows 7 Ultimate x64 SP1
    Thread Starter
       #44

    Thanks Wishmaster. It's a Xigmatek Gaia SD1283 Newegg.com - XIGMATEK Gaia SD1283 120mm Long Life Bearing CPU Cooler bracket included I7 i5 775 1155 AMD and dual fan push pull compatible I'm sorry, just having a tough time picturing this in my head.
      My Computer


  5. Posts : 22,814
    W 7 64-bit Ultimate
       #45

    Sorry Beau I couldn't help it; plug it in to the PSU on the HP and see what way the flow is.
      My Computer


  6. Posts : 1,586
    Windows 7 Ultimate x64 SP1
    Thread Starter
       #46

    It's all good Big Brother. :) Thats' a REAL good idea!
      My Computer


  7. Posts : 12,012
    Windows 7 Home Premium SP1, 64-bit
       #47

    The most common advice is to blow DOWN if the fan is mounted on top of the heatsink and to blow INTO the fins if the fan is mounted on the side.

    For a side mounted fan, try to mount the fan/heatsink combination so the fan blows both INTO the fins and TOWARD the rear of the case. You should be able to either rotate the heatsink 180 degrees or simply put the fan on the side facing the case front so it blows through the fins toward the rear.

    If you have a fan on the back side of the case, it should suck hot air OUT. If you have a fan on the front side, it should normally suck cool air IN.
      My Computer


  8. Posts : 1,586
    Windows 7 Ultimate x64 SP1
    Thread Starter
       #48

    Thank you Ignatz. Good info there and helps me with all the fans too. :)
      My Computer


  9. Posts : 306
    Windows 7 Home Premium x64
       #49

    WartHog said:
    Thanks Wishmaster. It's a Xigmatek Gaia SD1283 Newegg.com - XIGMATEK Gaia SD1283 120mm Long Life Bearing CPU Cooler bracket included I7 i5 775 1155 AMD and dual fan push pull compatible I'm sorry, just having a tough time picturing this in my head.
    This cooler appears to suck air from the heatsinks so that it cools them allowing the CPU to stay cool. It is EXTREMELY important that you keep these heatsinks free of dust. If they get clogged you could fry your CPU. Just need to buy some canned air, use an unused paint brush, and a vacuum to give your pc a good cleaning once every a year minimum. Some environments may require more frequent cleaning. It may be prudent to buy fan filters if you don't have any. Newegg sells them also.
    Last edited by WDAexodus; 23 Jan 2011 at 16:39.
      My Computer


  10. Posts : 1,586
    Windows 7 Ultimate x64 SP1
    Thread Starter
       #50

    Good stuff there WD. Thank you much! :)
      My Computer


 
Page 5 of 8 FirstFirst ... 34567 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 16:20.
Find Us