Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: I may just be the first on the block with new H100

04 Sep 2011   #31

Windows 7 Pro-x64

Just hold a thermometer aginst the radiator inlet (should be the top hose). Wait about two minutes then read the temperature. Do the same for the outlet. I was just curious about the temperature drop through the radiator.

My System SpecsSystem Spec

 I may just be the first on the block with new H100

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Ping DG, ftp block/httpd block
Hello Guys, I find this to be quite embarrassing, having an issue like this that I can't figure out. Here's what I can't do. 1. Ping DG (Default Gateway) 2. Ping my IP ( 3. Can't access my router via remote, even though its setup to allow it.
Network & Sharing
New CPU cooler. H100, H80, H70 Core with custom fans or H2o 620?
Hi guys, I'm trying to decide between an Antec H2o 620, an H70 core with custom fans, an H80 and an H100. I'm running an 8210 Oc'ed to 4300K and do play some demanding games. My case comes prepared to install a 240 mm radiator, hence the H100 is an option, but I think it might be overkill and...
PC Custom Builds and Overclocking
H100 pump makes somewhat loud grinding noise
Just finished installing my upgrades to my computer, including a nice new H100, and it would appear my hopes for a silent PC one day have been blown out of the water, with this cooler at least. The pump unit is making a sound like...well...a loud pump really, a constant grinding/buzzing/humming...
Hardware & Devices
H100 Installation
I can't get my H100 Corsair CPU cooler installed. I have the right screws but the if I use the screws mentioned in the manual guide, the cooler won't fit ontop of the screws because one side is too thick. If I use the thinner part of the screw it won't touch the CPU. I've been stuck on this for...
Hardware & Devices
Looking for 4 fans for a Corsair H100 Cooler
Looking for 4 fans for a Corsair H100 Cooler. Something nice that would work well with this cooler in a push/pull set-up.
Hardware & Devices
DR0, has a bad block
Problem, The device, \Device\Harddisk0\DR0, has a bad block. SeaTools results: Short DST - Fail Long DST - Fail Short Generic - Fail Long Generic - Fail HD Tune results: 1 Error at 0 Mb (LBA 1408)
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:30.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App