No worries mate..glad I could help.not long finished it.. temps r now lower than i thought they'd be. no need for a push pull setup.
i have it mounted so the fan is blowing through and out bk as my system temps r lower than my room temp. plus it seemed an odd way to do it as recomended. balls up air flow.
idle=30-33c
load=40-42
thats with my phenom at stock 3.4ghz. i have room temp wise to oc. only gonna aim for 3.6
well plz'd thanks again for the help
ganjiry,
FYI, all with no voltage change what so ever ! Just moved multiplier.....maybe I have a great chip/mobo combo?
Which ever you do, make sure your H50 pump is running 100% at all times and not being sped up or down like the System fan would. My H70 pump is ran off psu and the push/pull(2 different fan btw..120mm/140mm (see specs)) fans are ran by board so they speed up or slow with heat. If you do run pump off of board make sure to set in bios to run at 100%
howdo folks. yeah made sure its runnin 100% its connected to my pwr fan header and run @ 1450rpm +/-10rpm. best £50 ive spent lol. oc'd to 3.6mhz. prime 95 run maxed @50c but leveled at 47c
happy bunny
cheers folks
Hi all , you can avoid overpowering the motherboard fan plug-ins by a separate board with 4 to 10 fan plugs with a pin out to the power supply molex connector 12volt line. frozen CPU has them. they call them power blocks.
I am running the h50 on my system an MSI P45 PLATINUM same layout as yours ganjiry and i have a 7fan system.
quester12
cheers for the info chap. all my fans apart from the h50's fan r run off psu:)
ganjiry; your very welcome. I like your avatar.
quester12
Quote