Show Us Your Rig [3]

Page 83 of 189 FirstFirst ... 73818283848593183 ... LastLast

  1. linnemeyerhere
    Posts : 11,424
    Windows 7 Ultimate 64
       New #821

    It's funny the fine points we worry over. I guess we need to realize these are good problems to have, Your system is blazing quick but we always strive to lower temps and possibly push the limits just a little bit more. I'll report my less than scientific results with switching my fans around as well as my first venture into crossfiring.
    By chance are you speed controlling your Noc's? I run mine wide open as they are virtually silent. Oh and my pump is permanently set for max performance.
      My Computer

  3. Solarstarshines
    Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       New #822

    linnemeyerhere said:
    It's funny the fine points we worry over. I guess we need to realize these are good problems to have, Your system is blazing quick but we always strive to lower temps and possibly push the limits just a little bit more. I'll report my less than scientific results with switching my fans around as well as my first venture into crossfiring.
    By chance are you speed controlling your Noc's? I run mine wide open as they are virtually silent. Oh and my pump is permanently set for max performance.
    So are you going to get another hd5770 or upgrade in the crossfire

    I still have a HD 5770 Diamond wink wink in mint condition .............
      My Computer

  4. essenbe
    Posts : 26,869
    Windows 11 Pro
       New #823

    Alan, My nocs and the pump are all connected to the PSU and run 100% all the time. The pump shows 2350 RMPs.
      My Computer

  6. Andreas W
    Posts : 309
    Windows 7 Home Premium x64
       New #824

    A while back I posted some pictures of my case and since then I have slowly worked on doing some slight modification on my case. I also want to add a momentary pilot switch on the top but not sure where or how I do this since the ones I ordered from frozencpu looks different from the guide I read on mnpctech so if anyone could shed some light on how I connect the 2 pin cables I bought from mnpctech that would be awesome, picture of the switch is at the bottom. And for being the first I ever do anything like this I am happy about the result

    Front


    Side


    Back


    Top


    Inside


    System


    Pilot Switch
      My Computer

  7. linnemeyerhere
    Posts : 11,424
    Windows 7 Ultimate 64
       New #825

    That looks to be one cool customer of a rig. I too love my Noc's. as they are one of only a few fans that can run wide open and be totally silent. Great job and I so long for the time when I can order my 800D, I'm actually hoping they will release a Ver.2.0 soon.
      My Computer

  8. Andreas W
    Posts : 309
    Windows 7 Home Premium x64
       New #826

    linnemeyerhere said:
    That looks to be one cool customer of a rig. I too love my Noc's. as they are one of only a few fans that can run wide open and be totally silent. Great job and I so long for the time when I can order my 800D, I'm actually hoping they will release a Ver.2.0 soon.
    Yeah, considering all the noctua fans I have and that all of them are running at 12v its not that bad at all, the little noise that does come from them is hardly noticeable, it was way worse before I added the rubber grommets thou.
      My Computer

  10. linnemeyerhere
    Posts : 11,424
    Windows 7 Ultimate 64
       New #827

    The fans without them vibrated the aluminum? So what type of grommets did you use? I may have to get me a gross of those. Yikes so I just ordered 16gb of 2133 G.Skill Z series ram, my first venture away from Corsair and my first venture into OC'd ram. I will need some help and hopefully someone in the know will step forward with suggestions.
    Show Us Your Rig [3]-2133-g.skill-ddr3-4x4.png
      My Computer

  11. Andreas W
    Posts : 309
    Windows 7 Home Premium x64
       New #828

    linnemeyerhere said:
    The fans without them vibrated the aluminum? So what type of grommets did you use? I may have to get me a gross of those. Yikes so I just ordered 16gb of 2133 G.Skill Z series ram, my first venture away from Corsair and my first venture into OC'd ram. I will need some help and hopefully someone in the know will step forward with suggestions.
    Show Us Your Rig [3]-2133-g.skill-ddr3-4x4.png
    Cooling Fan Silencing Grommets

    I used those, and not really sure how much they helped or because I removed the mesh that was on the case, but doing those 2 things brought down the noise quite a bit, so right now I think I am only hearing my graphic cards fan right now
      My Computer

  12. ganjiry
    Posts : 3,118
    Win7 Home Premium x64 SP1
       New #829

    alright folks just a quick post cos im proppa gob smacked. ive just installed my new Fx-6100 and im proppa shocked with the temp. my 965be idled @ 35c. this thing idles @ 10c. SHOCKIN S*** i dont know load temps yet as ive not messed about with anythin yet
      My Computer

  13. linnemeyerhere
    Posts : 11,424
    Windows 7 Ultimate 64
       New #830

    ganjiry,
    I'm shocked as well and may think that something just isn't registering correct as that seems fantastically low for what's going on. Keep us in the loop if these numbers are backed up by bios and other programs.
      My Computer

 
Page 83 of 189 FirstFirst ... 73818283848593183 ... LastLast

  Related Discussions
Hi! Running server 2008 with exchange server. The user is using both OWA webmail and local Outlook. User got multiple inbox's to access, 1 personal and 2 for the company. The personal one got subfolders which shows in OWA, but the problem is the other folders. They are only needed by this 1...
Hello, A newbie here that just completed a first-time new Win7 PC build. Successful installation of Win7 Pro on WD 600GB 10000 system drive. Went back and installed 4 additional HDD. (2) WD Caviar Black 1TB 7200 RPM and (2) WD Caviar 7200 500GB HDD from XP system that were used for storage. ...
show us your dog
in Chillout Room

hi guys and gals this thread is for posting pics of your canines (put yer teeth back in den, doggies) I dont have a dog but i'd like to see yours so go on then show us your bitches and/or dogs :D please dont turn the thread into a dog meme dump, personal pics only, thanks .
Hey Guys, I cannot find a soultion to this problem. I was using my desktop like normal then an error came up saying that there was a hdd failure, and that i needed to scan for errors. all my files disappeared and only this error would come up. There would be hundreds of the same msg spamed on my...
I am trying to setup a default user or machine setup for how win7 handles folder view options. I want show hidden folders to be set to on for all users and the hide extensions for know file types to be unchecked or turned off ffor all users (so extensions show) I have located them in the registry...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 06:05.
Find Us