Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Cannot overclock 1055T via BIOS

20 Nov 2011   #1
BashirSabeel

Windows 7 Professional 64 bit
 
 
Cannot overclock 1055T via BIOS

Hi, I have decided to overclock my AMD X6 1055T from 2.8GHz to 3.5GHz using a video tutorial on youtube (How to Overclock the AMD Phenom II X6 1055T 1075T - YouTube), I have followed all the instructions but when I have the settings to CMOS and restart to Windows it still says 2.8GHz and the BIOS will say 3500MHz. I dont understand why this is and cant seem to find anything on this, I have purchased a Corsair H100 and temps start at 17 idle so heat is not an issue. I have taken a picture of the BIOS screen. Any help is very appreciated. Thanks.




Attached Thumbnails
-imag0014.jpg  
My System SpecsSystem Spec
.

20 Nov 2011   #2
stormy13
Microsoft MVP

Win 7 Ultimate x64
 
 

First idle temps mean nothing, load temps are what matter. Second don't take what Windows says it is at, if you overclock and have Cool and Quiet enabled then Windows won't report the correct speed. Here is mine overclocked from 2.8 GHz stock to 3.4 GHz,

-clockspeed.png

and Windows doesn't (and never has) report mine correctly when overclocked either.


My System SpecsSystem Spec
21 Nov 2011   #3
BashirSabeel

Windows 7 Professional 64 bit
 
 

Thanks for the reply, I overclocked back to the 3.5GHz and booted into Windows and check the speed with AMD Overdrive and it reported 3500MHz. But having another problem, seem to go into BSOD randomly. My RAM is 1333MHz before and after the overclock 1332MHz so it cant be that can it? Any idea why this is?
My System SpecsSystem Spec
.


21 Nov 2011   #4
stormy13
Microsoft MVP

Win 7 Ultimate x64
 
 

Probably need to bump the vcore up a little bit. Despite what may be shown in the Youtube video or any guides elsewhere, you have to remember that each CPU is different and what worked for one won't work for another.
My System SpecsSystem Spec
21 Nov 2011   #5
BashirSabeel

Windows 7 Professional 64 bit
 
 

Ok, I think I got it working on 3.5GHz without voltage increase. Ran Prime95 for about 1 hour temps didn't go above 33. I think it was something to do with the North Bridge frequency...but anyway one more question, because I am getting these low temps do you think if I put it to 4GHz it would be safe? So will putting this higher reduce the life of my component(s)? Again that's for the help you gave me


Attached Thumbnails
-cpu-temps.png  
My System SpecsSystem Spec
Reply

 Cannot overclock 1055T via BIOS




Thread Tools





Similar help and support threads
Thread Forum
Software Vs BIOS overclock
Bios overclocks are not lost even when pc is restarted EXCEPT that is there any difference between software and bios overclock ????????????????????
PC Custom Builds and Overclocking
PC Keeps on Hanging after "Overclock Fail" message in BIOS
I had my RAM RMA-ed recently because the first one kept my PC hanging and restarting. After I got the new RAM, there were no restarts, hangs or BSODs for 3 days. I even left my PC downloading overnight to check and it was fine. It did not hang or restart. Then yesterday, while I was browsing the...
PC Custom Builds and Overclocking
asus maximus III gene bios overclock problem...
guys, a serious problem... core i7 870 running on asus maximus III gene, every time i try to overclock my cpu on it, try to change bclk value, or to use cpu level up, system freezes until i restart..... when i restart, it says overclocking failure, reset setting to default mode... only oc i can do...
PC Custom Builds and Overclocking
Help to overclock Phenom II X6 1055T
This is a 2.8GHz stock CPU, mutlipliers are locked. I've been going with raising the FSB and volts and adjusting RAM settings. I'm aiming for 4.0GHz. I have had it to 3.7 but can't get back. When I raise the FSB to 286MHz the core 0 runs at .807GHz while the other cores are at 3.7. This board...
PC Custom Builds and Overclocking
Amd 1055t?
AMD has the 1055T, 1075T, and the 1090T at 2800, 3000, 3200. So I'm going to buy the 1055T because it seems to me that the 1075T and 1090T is just a 1055T which has been overclocked. So the 1055T should last longer and be more stable?
PC Custom Builds and Overclocking
Want to overclock trough BIOS
Hello, I want to overclock my CPU and GPU trough BIOS. The problem is, since i installed Windows 7 Ultimate x64 (clean install) my BIOS is diffrent : On windows XP (previos OS) i had a normal bluescreen typed BIOS with all the settings. Now on this BIOS there aren't any settings for overclocking...
PC Custom Builds and Overclocking

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App