Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Fan for my push pull h60

23 Feb 2012   #21
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

Perfect then the 31's will be fine. But as mentioned you can do as Everlong suggested and that's a really clean alternative and everyone has tons of those around.


My System SpecsSystem Spec
.
24 Feb 2012   #22
silverstormz

windows 7 home premium
 
 

My System SpecsSystem Spec
24 Feb 2012   #23
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

The NF-F12 is hot off the press and looks very cool. Also the pricing I've seen is actually less than the NF-P12's which is what I use for the radiators and case fans. I feel your likely splitting hairs but I do like the rubber mounts, ver.2.0 bearing and air flow control of this new F12 design. If I was building a new system that's what I would go with ....and I dig the looks.
My System SpecsSystem Spec
.

24 Feb 2012   #24
silverstormz

windows 7 home premium
 
 

Heh i have to say its the nices one by far but i do wish they made them in black :P
My System SpecsSystem Spec
24 Feb 2012   #25
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

I say Viva la difference !
My System SpecsSystem Spec
24 Feb 2012   #26
A Guy

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x64 SP1
 
 

I had looked at those before I chose the p12's. The reviews all seemed to say they were slightly noisier with similar airflow. So I went with the proven model. A Guy
My System SpecsSystem Spec
24 Feb 2012   #27
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

Good call 22.4 db vs 19.8 db the p12's are quieter by a little bit.
My System SpecsSystem Spec
24 Feb 2012   #28
A Guy

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x64 SP1
 
 

I hear fans, but it is way less. As soon as I install the GPU radiator tomorrow, I should have quiet (Pictures when done).

A Guy
My System SpecsSystem Spec
25 Feb 2012   #29
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

A Guy,
And I hear you! As an audiophile I can't stand any noise underneath my music enjoyment and even in total silence it's amazing the ac hum and hash my ears hear, so a fan in a rig is always in loudness degree's and I went from Generic case, Ultra and Thermaltake brand at like 8/10th's, speed controlled down to an effective 5/10th's to the Noc's which are run wide open at around 3/10th's on the "quiet/silent to pull my hair out" loudness scale.
Can't wait for the pic's !
My System SpecsSystem Spec
25 Feb 2012   #30
A Guy

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x64 SP1
 
 

My System SpecsSystem Spec
Reply

 Fan for my push pull h60




Thread Tools




Similar help and support threads
Thread Forum
BSOD - Bad Pull Caller and others
Hello to everybody: this is my first post on this forum and i desire to anticipate my thanks to everyone would try to give me an help i have just put together the following desktop computer: MB Asus P5Q CPU Intel Pentium E6600 Memory Corsair DDR2 400Mhz 2x2GB 5-5-5-18 VGA nvidia GT6600 HD...
BSOD Help and Support
Is a Push-Pull Setup Worth It?
I have an H100i cooling an i7 3770k @4.6Ghz. Two fans are pushing air into the radiator. How much of a temperature difference would there be if I add pull fans to it? Also, what fans do you recommend for the radiator? I am using the stock corsair fans that came with the cooler.
PC Custom Builds and Overclocking
CM Hyper 212 Plus One(push) OR Two(push-pull) fans?
Hello, I have AMD Phenom II X4 955 BE with CM Hyper 212 Plus cooler with 1 push fan I also have a SickleFlow case fan 120mm running @2000 RPM. Does it make difference to add another pull fan to become push-pull system? Rear case fan<<<<<Pull<<<<<heatsink<<<<<Push OR Rear case...
Hardware & Devices
Please help before i pull my hair out completely lol
Hi I have a dell inspiron 1545 laptop and it was working brilliant till yesterday when it all of a sudden froze on me so the only way i could reboot it was by turning it off by holding the button. i left it for a few mins before i switched it back on again but for some reason it would not boot...
General Discussion
Windows 7 had to pull a D-day to make it
Was just browsing around on Engadget and found these. Apparently Microsoft had no leway to work with. And the sights like engadget didn't give them any benefit of the doubt. personally it kinda hurt cuz i've always though of engadget as like a really reliable source, here to come to find out...
Chillout Room


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 17:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App