Intel I5 2500K 3,3 ghz to 4,0 - How?


  1. Posts : 60
    Windows Ultimate x64
       #1

    Intel I5 2500K 3,3 ghz to 4,0 - How?


    These are my specs:
    CPU: Intel I5 2500K 3,3 Ghz
    Graphics: Nvida Geforce 9800 GT
    RAM: 8 GB DDR3
    MB: Asus P8 P67

    I want to overclock it to 4,0, so two questions:
    Can I? and if yes then how do I do it safely?
    Thanks in advance
      My Computer


  2. Posts : 104
    Windows 10 Build 9926
       #2

    I guess you can, it's only 21% of OC, my rig is OCed 37,5%

    Increase the speed in 25/50 MHz each time
    Try to do it with stock vcore
    Memory may be OCed too
      My Computer


  3. Posts : 4,517
    Windows 7 Home Premium 64bit
       #3

    4.0Ghz OC can probably be done on stock voltages. Keep in mind, the 2500 overclocks itself underload to 3.8.

    Im not positive on your particular Motherbaord, but there are plenty here very familiar with them. Just hang on tight and Im sure someone will be along shortly to help.


    But, essentially all you need to is find you CPU multiplier setting, and change it to manual. Then change it to x40. And thats it.
    Depending on your particular chip, you may also need to tweak the voltages a bit, then again, you may not.

    And as always, you will still need to test it for stability
      My Computer


  4. Posts : 60
    Windows Ultimate x64
    Thread Starter
       #4

    Fixed


    Solved it just the way you said,
    its 4,3 ghz now and OC'ed the RAM as well to 16xx.
    Thanks so much for your help!
      My Computer


  5. Posts : 4,517
    Windows 7 Home Premium 64bit
       #5

    make sure to run a stress test to ensure its stable. Just because you can boot into Windows and get a few apps up and running does not mean its a stable OC.



    Also, watch your temps very closely. You never mentioned what cooling you had, and I didnt think to ask. but thats important.

    With small OCs, you may be OK with the Intel HS. But thre are also other variables such as ambient temps and how much airflow your case provides. You may need to back it down if it gets to warm, or get a better cooler on the CPU.

    Personally, for 24/7 use I would say stay between 65-70C under a Prime or Intel Burn test load.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 20:12.
Find Us