Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Help needed with G.Skill ram timings to get all or most of their speed

05 Apr 2012   #11

Windows 7 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by tw33k View Post
I found that my GSkill RAM performs a lot better at lower frequencies and tighter timings. Something to consider. Can you run Maxxmem and post a screen shot?

Tw33k since you brought this up every time i run this i get no Latency results is there a reason for that lol



Attached Images
 
My System SpecsSystem Spec
.

05 Apr 2012   #12

Windows 7 Ultimate (x64) SP1
 
 

That is very unusual. Off the top of my head I can't come up with a reason but I will investigate. Nice result tho.

Update: Just a thought...is your command rate (1T/2T) set to Auto?
My System SpecsSystem Spec
05 Apr 2012   #13

Windows 7 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by tw33k View Post
That is very unusual. Off the top of my head I can't come up with a reason but I will investigate. Nice result tho.

Thank you much Sir
My System SpecsSystem Spec
.


05 Apr 2012   #14

Windows 7 Ultimate (x64) SP1
 
 

See above
My System SpecsSystem Spec
05 Apr 2012   #15

Windows 7 Home Premium 64bit sp1
 
 

2t auto makes no difference can't change it and it doesnt have a command rate option which i should of noticed before well what can i do i re ran my test and i got better timmings

First the old one Second the new one

Scores went down and i was on IDE with better Numbers when i went back to Achi it went down wierd

Well ran it a few times went to normal maybe it was just me


Attached Images
  
My System SpecsSystem Spec
05 Apr 2012   #16

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate SP1 X64 (Windows 8.1, Linux Mint, Windows XP and others in VM)
 
 

I usually get a little different number every time I run it. It may depend on what's going on in the background.
My System SpecsSystem Spec
06 Apr 2012   #17

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Quote   Quote: Originally Posted by linnemeyerhere View Post
Hey all I just picked up the phone and dialed a local call to the 909 and spoke to G.Skill and they worked me right thru the mobo and bios settings. I'm stable now for my 965BE quad with adjusted timings and all. How great was that ! Support of this type is off the hook valuable and I would highly recommend G.Skill for this lifetime support! Now down the road when I go with a Bulldozer I can just call back and they will work me through closer to these modules 2133 mhz potential. !
Sounds like you did it the easy way
Looks good.

What settings did they have you change?
FSB: 233MHz
RAM multi: 1:4
RAM timings, nice and tight
Command Rate: 2T
NB Frequency: 2796MHz
DRAM voltage?
CPU IMC voltage?

What did you test with?
memtest86+ hopefully.


@essenbe
Good advice.
My System SpecsSystem Spec
06 Apr 2012   #18

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

Dave,
Sounds like you are the right guy to speak with.

233x17.5 = 4.07 Ghz
Dram Freq. = 1864
CPU-NB Freq. = 2796
Dram Ratio = 1:4
CPU Volt. = 1.445
CPU-NB Volt. 1.220
Dram Volt. = 1.6
Advanced Dram Config.
CAS = 9 CLK
tRCD = 10 CLK
tRP = 9 CLK
tRAS = 28 CLK
2T
My System SpecsSystem Spec
07 Apr 2012   #19

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Did you have your CPU OC'ed before the new RAM?

Settings all look good, did they just give you the RAM timings or did you work them down?
Have you tried lowering the CPU voltage?
Cool and Quiet enabled?

OC'ing is so much fun, going to have to give mine another run soon...
My System SpecsSystem Spec
07 Apr 2012   #20

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

Yes had the quad over clocked to 4.2 but had to roll that back to 4.077. I have brought the voltage down to 1.425 and everything is stable and happy. The timings they gave me and I have joined the forum there and will investigate further tightening over time, no rush.
My System SpecsSystem Spec
Reply

 Help needed with G.Skill ram timings to get all or most of their speed




Thread Tools



Similar help and support threads for2: Help needed with G.Skill ram timings to get all or most of their speed
Thread Forum
Solved How to set memory speed and timings PC Custom Builds and Overclocking
Solved Ram speed and timings etc PC Custom Builds and Overclocking
Solved Ivy Bridge High-Speed RAM Run with G.Skill 2666MHz PC Custom Builds and Overclocking
G Skill Ripjaws F3-10666CL9S-4GBRL 4GB DDR3 (1333MHz,Cas 9) timings ? PC Custom Builds and Overclocking
Solved New Memory New Timings, New Speed, NOT Happening. Performance & Maintenance
Ram Speed setup, i5 750, 8GB G.Skill Ripjaws, Asus p7p55 LX MB Hardware & Devices
mac like net-speed meter needed... Browsers & Mail

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:22 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33